Bioelectronics needs to continuously monitor mechanical and electrophysiological signals for patients. However, the signals always include artifacts by patients’ unexpected movement (such as walking and respiration under approximately 30 hertz). The current method to remove them is a signal process that uses a bandpass filter, which may cause signal loss. We present an unconventional bandpass filter material—viscoelastic gelatin-chitosan hydrogel damper, inspired by the viscoelastic cuticular pad in a spider—to remove dynamic mechanical noise artifacts selectively. The hydrogel exhibits frequency-dependent phase transition that results in a rubbery state that damps low-frequency noise and a glassy state that transmits the desired high-frequency signals. It serves as an adaptable passfilter that enables the acquisition of high-quality signals from patients while minimizing signal process for advanced bioelectronics.
Anisotropic Poisson's ratio substrate composed of a sandwich structure of two half-honeycomb layers facilitates the pressure reactivity to the crack based strain sensor with high sensitivity (3.1 × 106MPa−1), durability (10 000) and linearity.
On page 8130, T. Kim and co-workers present a dramatically enhanced sensitivity in nanoscale-crack-based mechanosensors by modulating the crack geometry, especially the crack depth. The nanoscale-crack-based sensor, with deeper crack depth, has higher crack–gap displacement, which provides effective conductivity changes. More impressively, it causes higher signal-to-noise ratio on vibration by acoustic signals from the human neck.