1 January 2022 in INTERNATIONAL REFEREED JOURNAL OF ENGINEERING AND SCIENCES
The most widely used welding joining method in the automotive industry is resistance spot welding. Resistance spot welding (RSW) is the welding area where heat is produced by the effect of resistance against the flow as a result of exposing the welded parts to a local electric current. It has become an important issue to apply an effective approach method to guarantee weld quality and optimize welding parameters. This is of high value in theory and practice. In the literature, the effects of spot welding process parameters on the weld core diameter and electrode penetration depth are mostly investigated. Weld strength in RSW is affected by many process parameters such as applied electric current, compression force, welding time. Due to the contact resistance and joule heating, a molten weld nugget zone is formed on the work pieces. It is desirable to have the maximum temperature at the interface of the parts to be joined. In practice, the production of welds of acceptable quality depends on the definition of optimum weld parameters and the application of appropriate controls to ensure constant weld quality over a long production period. In the experimental studies, the optimization of the welding parameters was studied in order to obtain the maximum tensile-shear strength. The most prominent process parameters in experimental studies are electrode force, welding currents and welding times. Different algorithms have been developed for the optimization of welding parameters. The verification tests clearly show that it is possible to increase the tensile-shear strength of the connection with the combination of appropriate welding parameters. As a result, the experimental results confirm the validity of the algorithms used to improve welding performance and optimize welding parameters in resistance spot welding processes.
28 September 2023 in Mühendislik Bilimleri ve Tasarım Dergisi
The contents of the shed opening frames used in the weaving machines and the pneumatic connections used in the dobby mechanisms of the shedding cost were made. As a result of the weaving, a new dobby with low cost, easy to manufacture and maintain was designed and produced in weaving machines. In particular, you can run a system that can manufacture fabrics with minimized tensions in warp threads. After executing the cam and tracking design, the drive, select, and motion acquisition to the frames were fabricated and assembled. After seeing the precise adjustments of the mechanisms, they were automatically operated at different speeds. Optimum results have been achieved in the incoming tension values in the warp with the new generation pneu-mechanical dobby machine, which is one of the shedding devices used to create sheds in Bizim Study weaving machines and provides the movements of frames for this purpose. The average warp tension during the weaving process was 34.6 cN.