19 May 2015 in IEEE Transactions on Electromagnetic Compatibility
A new common-mode filter structure based on planar electromagnetic bandgap (EBG) technologies is designed, fabricated, and measured. It is based on a previously proposed geometry, implementing a sequence of two or more EBGs resonating at a filtering frequency; however, the new filter is placed on the top of the PCB as a standalone component, instead of being included within the PCB stack up. The filter can be easily removed and substituted by another one that is designed to filter a different frequency. The replacement design should maintain the same external size of the component as the original filter, which can be achieved by choosing the permittivity of the dielectric as well as the relationship among the EBG parameters appropriately. The electromagnetic behavior of the filter is simulated and a prototype structure is fabricated and measured. Results are compared to validate the design concept and procedure.
24 June 2016 in IEEE Transactions on Electromagnetic Compatibility
Common-mode (CM) noise on differential signals can be suppressed by planar electromagnetic bandgap (EBG) technologies. In this study, two new CM filter structures were designed, fabricated, and measured. The filters are based on a previously proposed geometry, a “sandwich-type” EBG structure that resonates at the desired filter frequency; however, the new filters are placed on the top of the PCB as a surface-mount component, instead of being implemented within the PCB stackup. Stripline and microstrip versions of the surface-mount filter are considered. The filters can be easily removed and substituted with another one that is designed to filter a different frequency but maintains the same footprint and external dimensions. In addition, the surface-mount filter allows us to incorporate dc blocking capacitors into the microstrip version of the filter, thus providing two functions in one package. The total radiated power (TRP) of the implemented filter is investigated and discussed. RF absorbing material and traditional shielding are considered to reduce the TRP.
1 July 2015 in IEEE Transactions on Electromagnetic Compatibility
This paper deals with the filters based on EBG cavities employed for reducing common-mode currents along differential stripline traces. The crosstalk among differential interconnects routed in close proximity to EBG-based filters, and next to filtered pairs, is accurately quantified. The comparison between the experimental and simulation frequency-domain results validate the proposed filter's effectiveness and make the simulation model reliable for investigating the complex multichannel crosstalk problem. This paper focuses on the stripline environment, where crosstalk occurs among traces routed on adjacent layers, with the EBG cavity acting as a coupling path. Multichannel time-domain simulations complete the characterization of the filter, showing the limited effects of the filter on the intentional differential signal, and the beneficial impact on reducing the potentially radiating common-mode harmonics. The quantification of the common-mode spectrum shows that the filtered harmonics are reduced by 10-15 dB; thus, minimizing the corresponding electromagnetic interference. Design guidelines are defined for the filter layout according to the relative position of unfiltered differential traces, when constraints force them to be placed in close proximity to EBG cavities and filtered pairs. In particular, the best layout for unfiltered traces on adjacent layers is orthogonal with respect to the filtered pair, whereas the parallel routing should be carefully used taking into account the signal bandwidth on the victim pairs.