24 January 2022 in Nature Electronics
28 August 2019 in Energy & Environmental Science
Flexible thermoelectrics is a synergy of flexible electronics and thermoelectric energy conversion. To date, state-of-the-art thermoelectrics is based on inorganic semiconductors that afford high electron mobility but lack in mechanical flexibility. By contrast, organic materials are amply flexible but low in electrical mobility and power output; the inorganic–organic hybrid design is a viable material-level option but has critical device-level issues for practical application. Here, we reported high intrinsic flexibility and state-of-the-art figures of merit (up to 0.44 at 300 K and 0.63 at 450 K) in Ag2S-based inorganic materials, opening a new avenue of flexible thermoelectrics. In the flexible full-inorganic devices made of such Ag2S-based materials, high electrical mobility yielded a normalized maximum power density up to 0.08 W m−1 under a temperature difference of 20 K near room temperature, orders of magnitude higher than organic devices and organic–inorganic hybrid devices. These results promised an emerging paradigm and market of wearable thermoelectrics.
28 July 2023 in Science Advances
Fast and high-resolution x-ray imaging demands scintillator films with negligible afterglow, high scintillation yield, and minimized cross-talk. However, grain boundaries (GBs) are abundant in polycrystalline scintillator film, and, for current inorganic scintillators, detrimental dangling bonds at GBs inevitably extend radioluminescence lifetime and increase nonradiative recombination loss, deteriorating afterglow and scintillation yield. Here, we demonstrate that scintillators with one-dimensional (1D) crystal structure, Cs 5 Cu 3 Cl 6 I 2 explored here, possess benign GBs without dangling bonds, yielding nearly identical afterglow and scintillation yield for single crystals and polycrystalline films. Because of its 1D crystal structure, Cs 5 Cu 3 Cl 6 I 2 films with desired columnar morphology are easily obtained via close space sublimation, exhibit negligible afterglow (0.1% at 10 ms) and high scintillation yield (1.2 times of CsI:Tl). We have also demonstrated fast x-ray imaging with 27 line pairs mm −1 resolution and frame rate up to 33 fps, surpassing most existing scintillators. We believe that the 1D scintillators can greatly boost x-ray imaging performance.
8 October 2010 in Physical Review B
We determine the energy diagram of graphene oxides (GOs) as a function of oxygen and hydrogen chemical potentials by systematic first-principles calculations. The diagram reveals that thermodynamically stable GOs can exist only in stringent growth conditions in the form of hydroxyl, epoxy, or mixed hydroxyl/epoxy phases. There is no mixed phase with carbon because of substrate relaxation, which is unique to two-dimensional system with little coupling in the third direction such as graphene. The mixed phase observed experimentally is interpreted instead, in terms of a kinetic stability of nonequilibrium grown GOs against phase separation.
21 August 2015 in Nanoscale
Organic–inorganic hybrid perovskite solar materials, being low-cost and high-performance, are promising for large-scale deployment of the photovoltaic technology. A key challenge that remains to be addressed is the toxicity of these materials since the high-efficiency solar cells are made of lead-containing materials, in particular, CH3NH3PbI3. Here, based on first-principles calculation, we search for lead-free perovskite materials based on the split-anion approach, where we replace Pb with non-toxic elements while introducing dual anions (i.e., splitting the anion sites) that preserve the charge neutrality. We show that CH3NH3BiSeI2 and CH3NH3BiSI2 exhibit improved band gaps and optical absorption over CH3NH3PbI3. The split-anion approach could also be applied to pure inorganic perovskites, significantly enlarging the pool of candidate materials in the design of low-cost, high-performance and environmentally-friendly perovskite solar materials.
18 March 2022 in ACS Applied Materials & Interfaces