8 January 2018 in IEEE Transactions on Antennas and Propagation
Novel microstrip magnetic monopole and dipole antennas are proposed to achieve a high directivity along the elevation plane as well as a horizontally polarized omnidirectional pattern in the azimuth plane. The directivity of this microstrip magnetic monopole antenna is calculated by numerical integration; the results show that the directivity increases with the antenna length when the antenna resonates in the fundamental mode. However, simulation shows that the main beam is tilted away from the azimuth plane when the antenna length exceeds 2λ due to high-order resonant mode interference. A solution is provided to suppress the second resonant mode and retain the radiation peak in the azimuth direction. The peak gain of the microstrip magnetic monopole is increased to 7.2 dBi when the antenna length is approximately 3λ. A microstrip magnetic dipole antenna with an antenna length of 6λ is also designed to obtain a higher gain of 9.7 dBi. The impedance bandwidths of the microstrip magnetic monopole and dipole antennas are 6.5% (2.37-2.52 GHz) and 7.3% (2.35-2.53 GHz), respectively. The proposed antennas produce maximum radiation in the azimuth direction and have horizontally polarized omnidirectional patterns in the azimuth plane.
12 March 2020 in IEEE Antennas and Wireless Propagation Letters
A novel folded slot antenna is proposed for the design of high-gain and compact endfire arrays. This study shows that a planar slot antenna retains bi-directional radiation characteristics when folded into a compact structure. A folded slot antenna was designed in order to obtain a high endfire gain of 6 dBi. The proposed slot antenna's high gain makes it a good candidate for designing endfire arrays with vertical polarization. A series-fed technique is proposed in order to design two-element endfire and backfire arrays. Subsequently, an eight-element endfire array is proposed by combining endfire and backfire two-element arrays. The eight-element array is capable of producing a high endfire gain of 13.2 dBi with a size of ${1.80\lambda_{0} \times 1.40\lambda_{0}}$ , which is less than half the size of the existing endfire antennas with similar vertically polarized gain.
2 August 2016 in IEEE Transactions on Antennas and Propagation
A new microstrip endfire array antenna with vertical polarization is proposed in this paper. The novel array element consists of two symmetrical rectangular patches on both sides of a substrate with two edges shorted and other edges opened. We use a cavity model to analyze the mechanism of the array element, which we find can work as a “magnetic monopole antenna.” The magnetic current on the open sides, which features quarter cycle sinusoidal variation, generates a tilted monopole-like radiation pattern. The tilted angle can be easily determined by the length-to-width ratios of the magnetic monopole antenna. A two-element endfire array and a four-element endfire array are proposed here to achieve endfire vertical polarization with a very low profile (3 mm). The two-element endfire array has a bandwidth from 2.42 to 2.48 GHz and a peak endfire gain of 5.3 dBi. With four array elements, the peak endfire gain can be enhanced to 7.7 dBi in a bandwidth from 2.40 to 2.48 GHz.
11 May 2018 in IEEE Transactions on Antennas and Propagation
A novel dual-polarized antenna, with a large bandwidth and a high front-to-back ratio, is proposed in this communication. The antenna is composed of printed dipoles and tapered baluns above a square ground plane to yield a wide bandwidth. Semicylindrical walls are loaded on the edge of the ground plane to suppress the back lobe and produce a stable gain. Backward radiation is suppressed by the diffraction effect of the semicylindrical sidewalls. Simulation shows that the back-lobe level can be reduced below -13 dB in a large frequency range without degrading the antenna bandwidth. The proposed antenna is fabricated and the measured results show that it has an impedance bandwidth of 69.6% (1.46-3.02 GHz) for voltage standing wave ratio <;1.5. Within the bandwidth, the gain varies between 7.1 and 8.4 dBi, and the front-to-back ratio is above 20 dB. The proposed antenna is suitable for outdoor base station applications, and the back-lobe suppression technique can be applied easily to base station antennas.
4 March 2019 in IEEE Access
20 July 2022 in IEEE Transactions on Antennas and Propagation
An endfire periodic leaky-wave antenna (LWA) with high gain is presented in this paper, which consists of a series of rhombic elements based on double-sided parallel stripline (DSPSL). The endfire mechanism of the proposed antenna is illustrated by the phase difference of the far-field of each arm in the rhombic element. Meanwhile, a tradeoff between the tilted angle θ0 and the width w is found, which assures an optimum transverse aperture for achieving high-gain endfire radiation. Moreover, the improved Hansen–Woodyard (IHW) condition is applied to predict the optimum endfire phase constant. Finally, a prototype is fabricated and tested. The maximum endfire gain of 19.8 dBi is measured at 11.4 GHz, which is close to the simulated and predicted results. The proposed periodic rhombic antenna provides more choice for the modern communication system.