Co-packaged optics applications require scalable and high-yield optical interfacing solutions to silicon photonic chiplets, offering low-loss, broadband, and polarization-independent optical coupling while maintaining compatibility with widely used approaches for electrical redistribution. We present two heterogeneous integration techniques that enable high-density optical I/O connections, utilizing adiabatic coupling between on-chip silicon nitride (SiN) waveguides and package-level polymer optical waveguides. In the first approach, polymer waveguides are patterned using standard lithography directly on the surface of the photonic chip, ensuring compatibility with chip embedding as commonly employed in chip-first fanout wafer-level packaging. In the second approach, photonic chips are flip-chip bonded to the package substrate. Both techniques have been experimentally validated, achieving a coupling efficiency near 1 dB between SiN and polymer waveguides in the O-band, for both TE and TM polarizations. SiN tapers were designed using the “Mono” method to optimize phase-matching conditions between the two waveguides, a critical requirement for integrating diverse optical components. These results demonstrate the potential of polymer waveguides in co-packaged optics applications, achieving sub-2 dB chip-to-chip and chip-to-fiber coupling losses.
27 September 2024 in Journal of Physics: Photonics
We present an elegant and effective approach for the design of adiabatic waveguide couplers tailored for the heterogeneous integration of photonic building blocks. This method empowers users to incorporate the shortest taper(s) in their designs, while upholding optimal coupling efficiency. The technique assesses mode overlap between a minimum of two waveguides within the cross-section of any heterogeneous material stack, determining the necessary waveguide cross-sectional dimension to achieve optimal coupling efficiency. Two illustrative design applications are showcased and compared to a linear, concave, and convex taper for reference: a SiN-to-polymer structure exhibiting a 40% coupling improvement and a Si-to-GeSi structure having a 2.2 up to 5 times shorter length.
We report the design, fabrication and characterization of a broadband silicon nitride to polymer waveguide adiabatic coupling interface with sub-1 dB loss around 1310 nm, enabling a sub-2 dB chip-to-chip and chip-to-fiber coupling loss.
Co-Packaged Optics applications require scalable and high-yield optical interfacing solutions to silicon photonic chiplets, offering low-loss, broadband, and polarization-independent optical coupling while maintaining compatibility with widely used approaches for electrical redistribution. We present two heterogeneous integration techniques that enable high-density electrical and optical I/O connections, utilizing adiabatic coupling between on-chip silicon nitride (SiN) waveguides and package-level polymer optical waveguides. In the first approach, polymer waveguides are patterned using standard lithography directly on the surface of the photonic chip, ensuring compatibility with chip embedding as commonly employed in chip-first fanout wafer-level packaging. In the second approach, photonic chips are flip-chip bonded to the package substrate. Both techniques have been experimentally validated, achieving a coupling efficiency near 1 dB between SiN and polymer waveguides in O-band, for both TE and TM polarizations. SiN tapers were designed using the "Mono" method to optimize phase-matching conditions between the two waveguides, a critical requirement for integrating diverse optical components. These results demonstrate the potential of polymer waveguides in Co-Packaged Optics applications, achieving sub-2 dB chip-to-chip and chip-to-fiber coupling losses.