1 November 2019 in APL Photonics
Silicon photonics (SiPh) enables compact photonic integrated circuits (PICs), showing superior performance for a wide variety of applications. Various optical functions have been demonstrated on this platform that allows for complex and powerful PICs. Nevertheless, laser source integration technologies are not yet as mature, hampering the further cost reduction of the eventual Si photonic systems-on-chip and impeding the expansion of this platform to a broader range of applications. Here, we discuss a promising technology, micro-transfer-printing (μTP), for the realization of III-V-on-Si PICs. By employing a polydimethylsiloxane elastomeric stamp, the integration of III-V devices can be realized in a massively parallel manner on a wafer without substantial modifications to the SiPh process flow, leading to a significant cost reduction of the resulting III-V-on-Si PICs. This paper summarizes some of the recent developments in the use of μTP technology for realizing the integration of III-V photodiodes and lasers on Si PICs.
16 November 2022 in IEEE Journal of Selected Topics in Quantum Electronics
Silicon photonics (SiPh) is a disruptive technology in the field of integrated photonics and has experienced rapid development over the past two decades. Various high-performance Si and Ge/Si-based components have been developed on this platform that allow for complex photonic integrated circuits (PICs) with small footprint. These PICs have found use in a wide range of applications. Nevertheless, some non-native functions are still desired, despite the versatility of Si, to improve the overall performance of Si PICs and at the same time cut the cost of the eventual Si photonic system-on-chip. Heterogeneous integration is verified as an effective solution to address this issue, e.g. through die-wafer-bonding and flip-chip. In this paper, we discuss another technology, micro-transfer printing, for the integration of non-native material films/opto-electronic components on SiPh-based platforms. This technology allows for efficient use of non-native materials and enables the (co-)integration of a wide range of materials/devices on wafer scale in a massively parallel way. In this paper we review some of the recent developments in the integration of non-native optical functions on Si photonic platforms using micro-transfer printing.
29 August 2016 in Applied Physics Letters
We report on an integration approach of III/V nano ridges on patterned silicon (Si) wafers by metal organic vapor phase epitaxy (MOVPE). Trenches of different widths (≤500 nm) were processed in a silicon oxide (SiO2) layer on top of a 300 mm (001) Si substrate. The MOVPE growth conditions were chosen in a way to guarantee an efficient defect trapping within narrow trenches and to form a box shaped ridge with increased III/V volume when growing out of the trench. Compressively strained InGaAs/GaAs multi-quantum wells with 19% indium were deposited on top of the fully relaxed GaAs ridges as an active material for optical applications. Transmission electron microcopy investigation shows that very flat quantum well (QW) interfaces were realized. A clear defect trapping inside the trenches is observed whereas the ridge material is free of threading dislocations with only a very low density of planar defects. Pronounced QW photoluminescence (PL) is detected from different ridge sizes at room temperature. The potential of these III/V nano ridges for laser integration on Si substrates is emphasized by the achieved ridge volume which could enable wave guidance and by the high crystal quality in line with the distinct PL.
3 June 2016 in Journal of Applied Physics
We present a dark current analysis in waveguide-coupled germanium vertical p-i-n photodetectors. In the analysis, a surface leakage current and a bulk leakage current were separated, and their activation energies were extracted. The surface leakage current originating from the minority carrier generation on the Ge layer sidewalls, governed by the Shockley-Read-Hall process and enhanced by the trap-assisted-tunneling process, was identified as the main contribution to the dark current of vertical p-i-n photodiodes at room temperature. The behavior of this surface leakage current as a function of temperature and reverse bias voltage is well reproduced by using the Hurckx model for trap-assisted-tunneling.