Glazing components are the most challenging element of the building envelope system. The insertion of a Phase Change Material coupled with a thermotropic layer is herewith proposed as an innovative solution aimed at improving the energy performance of the fenestration. The intention is to increase the dynamic features of glazing systems and to enhance their capability of exploiting solar energy – a crucial feature in nearly Zero Energy Buildings.The paper presents the experimental analysis of two prototypes of such a glazing concept and the assessment of their energy performance during the warm season. The samples are installed on an outdoor thermostatic cell facing south, together with a reference triple glazed unit, and continuous measurements of temperatures, irradiances and heat fluxes are performed. In the summer season, when the aim of the glazing system is to reduce the solar gain and to allow daylighting the energy performance is very promising. When compared to the reference technology, both the prototypes are able to reduce to a great extend the direct transmitted solar energy, as well as to smooth the peak indoor surface temperature of the glazing. In particular, one of the two configurations lowers down the solar energy gain under all boundary conditions, while the other configuration presents a slightly worse performance than the other prototype when high solar irradiation occurs. An attempt to measure the thermal transmittance was also carried out and it is shown that the insertion of PCM does not increase the U-value of the component
Phase change materials (PCMs) are an emerging technology that can be integrated in building envelope components. PCMs are able to stabilise indoor air temperature and increase thermal energy storage especially in lightweight constructions. Within a research activity aimed at developing advanced plasters with improved thermal properties, a plaster which incorporates a microencapsulated paraffin-based PCM was developed. The paper highlights the importance of an overall analysis, facing both operational and embodied energy, since the expected decrease of the energy consumption during the operational stage difficultly counterbalances the high energy impact related to manufacturing processes