Atomic layer deposition (ALD) is known for depositing ultra-thin film materials that enable control of composition, highly conformal film, desirable thickness, self-saturating, and uniform deposition, and this review has established its evolvement in recent times. The ALD techniques have made more device applications possible in energy storage, solar cells, memory storage, catalysis, sensors, and many more. Its advantages and disadvantages for different modes were emphasized and the precursors used for several ALD processes were highlighted. The bibliometric approach used in this review has also revealed how ALD has evolved through the assessment of published documents, journals, authors, organizations, sponsors, and countries. The method also revealed that ALD research is limited in Africa, however, the first two ALD facilities were confirmed to be acquired by T.C. Jen at the University of Johannesburg, which will in turn burst ALD material research in Africa. The current study has provided researchers with a choice when considering using the ALD technique and in terms of research collaborations. It concluded by highlighting the challenges and future perspectives of ALD and bibliometric technique.
We have synthesized r-GO-ATA-Fe2O3 nanocomposites and studied their microstructural and electromagnetic properties for future possible magnetic resonance imaging for biomedical application. X-ray diffraction, transmission electron microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, and X-ray absorption near edge spectroscopy were used to study the structural and electronic properties, while a superconducting quantum interface device magnetometer was used for investigating the magnetic behavior of the nanocomposites. The nanocomposites have been found to reduce the graphitic structure of GO due to the substitution of carbon/oxygen and/or iron nanoparticles. Conversely, the electrical conductivity of nanocomposites is found to be high due to the formation of Fe—C/Fe—O bonds in the structure of the nanocomposites. The composites also exhibit superparamagnetic features as observed from the M-H hysteresis loop with saturation magnetization of ≈0.1 emu/g at 1.8 K temperature. The results, in general, suggest possible applicability of r-GO/Fe2O3 nanocomposites as an effective multifunctional platform for magnetic resonance imaging in biomedical applications.
27 June 2020 in International Journal of Environmental Science and Technology
Silicon-oxide-nanoparticle (SiO2-NP) heteroatoms were decorated/deposited onto multiwall carbon nanotube (MWCNT) surface to tune the properties of MWCNTs for electronic and magnetic applications. To achieve this objective, SiO2-NPs and MWCNTs were prepared and suspended together into toluene and heated at <100 °C for the formation of MWCNTs/SiO2-NP nanocomposites. A change in the microstructure, electronic, electrical, and magnetic behaviors of MWCNT nanocomposites decorated/deposited with silicon content was investigated using different techniques, viz., scanning electron microscopy, X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy for structural, compositional, and electronic structure, while current–voltage was used for electrical properties and field-dependent magnetization and electron spin resonance techniques were used for magnetic properties. The results indicated that SiO2-NPs adhered onto MWCNTs, resulting in variation in the material conductivity with the Si-NP content. The coercivity of MWCNT nanocomposites adhered with 1.5 atom % Si-NPs (HC@40 K = 689 Oe) is higher than that of those adhered with 5.75 atom % Si-NPs (HC@40 K = 357 Oe). In general, the results provide information about the possibilities of tuning the electronic, electrical, and magnetic properties of MWCNTs by adherence of SiO2-NPs onto them. This tuning of material properties could be useful for different electronic and magnetic device applications.