18 July 2025 in Physical Review Applied
Semiconductor components based on silicon carbide ( Si C ) are a key component for high-power electronics. Their behavior is determined by the interplay of charges and electric fields, which is typically described by modeling and simulations that are calibrated by nonlocal electric properties. So far, the 3D mapping of both the electric field and the concentrations of free charge carriers inside an electronic device remains a challenging task. To fulfill this information gap, we propose an operando method that utilizes single silicon vacancy ( V Si ) centers in 4 H - Si C . The V Si centers are at various positions in the intrinsic region of a -- diode. To monitor the local static electric field, we perform Stark-shift measurements based on photoluminescence excitation, which allows us to infer the expansion of the depletion zone and therefore to determine the local concentration of dopants. Besides this, we show that our measurements allow us to additionally obtain the local concentration of free charge carriers. The method presented here therefore paves the way for a new quantum-enhanced electronic device technology, capable of mapping the interplay of mobile charges and electric fields in a working semiconductor device with nanometer precision.
20 May 2026 in Key Engineering Materials
Precise control of optical transitions of color centers like silicon vacancies (V Si ) in 4H-SiC is essential for their functionalization. An applied electric field (E || c) of a pin-diode can be used to tune the optical properties of V Si centers via the Stark effect, while the associated space charge region under bias suppresses spectral diffusion. Unlike commonly used 4H-SiC c-plane wafers, a-plane wafers allow a scalable fabrication of lateral pin-diodes and resonant laser excitation of the V Si perpendicular to the wafer surface (a ⊥ c). In this work non-circular lateral pin-diodes oriented perpendicular to the wafer flat were produced in a scalable, CMOS-compatible process. Electrical characterization revealed that 97% of the devices on an a-plane wafer with n-type epitaxial layer were functional, exhibiting breakdown voltages exceeding 200 V and reverse currents below 100 pA/µm, enabling low current noise during optical measurements. The diodes remained operational at cryogenic temperatures after frozen-out charge carriers were re-ionized by the applied electric field. Electron irradiation followed by thermal annealing at 600 °C was used to generate V2 silicon vacancies in the intrinsic region without significantly altering the electrical characteristics. Optically detected magnetic resonance (ODMR) measurements on selected single emitters confirmed the presence of V2 centers by detecting a contrast at 70 MHz, while cryogenic photoluminescence (PL) spectra revealed a zero-phonon line (ZPL) peak at 916 nm.
12 May 2026 in Nano Letters
19 May 2026 in Key Engineering Materials
With ever-increasing power conversion densities in electric power converters, the volume of the converter must shrink for a certain power rating, which in turn demands the reduction in size of the energy-storing passive component. Constant power rating of those systems and the reduction of size of passive components leads to a higher switching frequency of the semiconductor power switches. At high switching frequencies, dynamic losses in the power semiconductor device dominate the overall power losses. Consequently, novel device concepts that address dynamic power losses may be superior to conventional power devices, even though they might have a higher static on-state loss. In this paper, the concept of the power tunneling field-effect transistor (Power-TFET) employing tunneling between a highly p-type doped source region and a n-type accumulation channel is proposed and compared to an equivalent LDMOS in terms of static and dynamic losses. Devices fabricated in a 2 µm 4H-SiC technology are measured and compared to evaluate the viability of the Power-TFET device concept. The fabricated Power-TFET shows high-voltage blocking capability and has a switchable tunneling junction with on-and off-state, despite showing high on-state resistance due to the tunneling through the wide bandgap of 4H-SiC. The alternative of tunneling through a switchable Schottky barrier is simulatively explored to solve the high on-state resistance of the pn-junction based Power-TFET.
20 May 2026 in Key Engineering Materials
Silicon vacancies (V Si ) are relevant for quantum technologies, including sensing, computing, and communication. For the realization of quantum photonic integrated circuits (QPICs) and, therefore, co-integration of optical and electrical devices with resonant excitation through the wafer surface, a-plane 4H-SiC wafers are required. Transferring established complementary metal-oxide-semiconductor (CMOS)-compatible processes from c-plane to a-plane wafers is, therefore, a crucial step. In this work, key fabrication steps, namely ion implantation, thermal oxidation, and ohmic contact formation, were investigated for a-plane 4H-SiC substrates. To demonstrate successful process transfer, p-channel MOS field-effect transistors were fabricated and electrically characterized, showing comparable I on /I off ratios and mobilities to their c-plane counterparts, but with a threshold voltage shift from −7.1 V to −12.0 V on the a-plane. Additionally, tunneling diodes were realized as broadband light emitters, with a significant portion of the emission spectrum falling within the range of off-resonant excitation of V Si centers. The devices maintained light emission functionality down to cryogenic temperatures.