Electric system operators are increasingly concerned with the potential system‐wide impacts of the large‐scale integration of distributed energy resources including voltage control, protection coordination, and equipment wear. This prompts a need for new simulation techniques that can simultaneously capture all the components of these large integrated smart grid systems. This study describes a novel platform that combines three emerging research areas: power systems co‐simulation, power hardware in the loop (PHIL) simulation, and lab–lab links. The platform is distributed, real‐time capable, allows for easy internet‐based connection from geographically‐dispersed participants, and is software platform agnostic. The authors demonstrate its utility by studying real‐time PHIL co‐simulation of coordinated solar photovoltaic (PV) firming control of two inverters connected in multiple electric distribution network models, prototypical of US and Australian systems. The novel trans‐pacific closed‐loop system simulation was conducted in real time using a power network simulator and physical PV/battery inverter at power at the National Renewable Energy Laboratory in Golden, CO, USA and a physical PV inverter at power at the Commonwealth Scientific and Industrial Research Organisation's Energy Centre in Newcastle, NSW, Australia. This capability enables smart grid researchers throughout the world to leverage their unique simulation capabilities for multi‐site collaborations that can effectively simulate and validate emerging smart grid technology solutions.
Microgrids are local low voltage power systems that offer many advantages over grid power in terms of security, power autonomy and the ability to incorporate distributed generation, including renewable energy. In low voltage AC microgrids the use of renewable energy requires DC to AC conversion using inverters. With a large number of inverters in a microgrid, there are issues relating to their ability to support such a small power system when it is under stress. Such stress can be caused by voltage and frequency fluctuations arising from inside or outside the microgrid, or from faults. Currently, microgrids depend upon careful design and specification of their components for reliable operation. Many commercial inverters offer no more than power conversion at unity power factor. However, microgrids of the future are likely to be self configurable, and inverters have the potential to do much more, for example to help control reactive power and harmonics, or to offer ancillary services. In this paper, we provide some examples of the behavior of a group of commercial inverters in a working microgrid, and examine challenges and opportunities for these devices as microgrids increase in popularity.
Whilst distributed generation, particularly in the form of solar photovoltaics, is appearing as one of the key components of future power systems, it brings many challenges. Challenges such as intermittent generation supply, fault detection, anti-islanding operation and voltage control have received a great deal of research and practical attention. One practical challenge that hasn't been examined in detail is the ability of power system operating with a significant amount of distributed generation (and thus relatively less rotating inertia) to cope with sudden shifts in load. This paper presents the results of a practical investigation in to such an issue. One way of managing intermittent generation supply is to use output forecasting techniques, that give a forecast of generation availability at some future time, to ensure supply will be matched with likely future demand. We also present the results of an investigation in to the performance of one such solar output forecasting technique, based around the use of support vector machine approaches that take weather forecasts to provide detailed future generation forecasting.