16 December 2025 in IEEE Sensors Journal
High-precision rotation measurements are of great importance for the field of inertial navigation and geophysics. The cold atom interferometer gyroscope (CAIG) has no mechanical wear and can achieve a better angular random walk (ARW). Therefore, the CAIG has received wide attention in recent years. Typically, the CAIG has a complex structure, large volume, and heavy weight, especially for the CAIG based on an atomic fountain realized with four Raman pulses. Previously, we have implemented a compact CAIG and carried out the transportable experiments. In this paper, the phase shifts induced by the main noises are analyzed, including the vibration noise, the Raman phase noise, and the detection noise, which significantly limit the sensitivity of our CAIG. The vibration compensation algorithm has been utilized to suppress the vibration noise. Besides, the phase noise has been reduced with the parameter optimization of the PID controller. The polarization purification for the detection beam has been implemented by two Glan-Taylor prisms to reduce the influence of detection noise. Finally, the comprehensive analysis of these noises has been carried out so that a CAIG with a total interrogation time of 4T=400 ms and a Sagnac area of 2.27 cm2 has been achieved. The estimated measurement ARW is 1.12 μrad/s/Hz1/2, and a bias instability of about 30 nrad/s can be reached with an integration time of 2000 s. Compared with the previously reported ARW of 4.4 μrad/s/Hz1/2, the ARW has been improved by nearly four times. The experimental results of this paper can provide an effective reference for the development of compact and transportable CAIG.