22 February 2023 in IEEE Transactions on Dielectrics and Electrical Insulation
Metalized film capacitor degradation under ultra-high electric fields is crucial for the reliability of VSC-HVDC systems. In the present study, systematic investigations were performed that metalized film capacitors were aged under the DC electric field ranging from 300 to 400 kV/mm. Results showed that under moderate electric field, the capacitance reduction of sample capacitors presented two stages with different decay rates. With the increase of the electric field, the rapid degradation occurred immediately on the starting of the aging process, suggesting a voltage threshold determining the capacitors’ stability. In addition, the degradation mechanisms of both metalized films and bi-axial oriented polypropylene (BOPP) base films were investigated by statistical analysis and structural experiments. Below the voltage threshold, more shallow traps were generated and the activation energy of molecular motions was reduced due to PP molecules scissions, resulting in the decrease of breakdown strength (BDS) of BOPP films. While above the voltage threshold, the accelerated failure could be attributed to two main causes: the fast breakdown of originally formed weak points and the dramatically increased self-healing area. The study can contribute to the design and evaluation of DC-link capacitors both experimentally and theoretically.
28 May 2024 in High Voltage
This study focuses on the degradation behaviour of metallised film capacitors, which are the essential components for the stability of converter valves in flexible ultra‐high voltage direct current (HVDC) transmission systems. Through systematic experimentation, we investigated the failure mechanisms of MFCs under HVDC fields with superimposed harmonics, considering both equipment and material perspectives. The experiments subjected capacitors to 500 h of ageing under two conditions: a DC/AC‐superimposed field with a constant DC component of 290 kV/mm and an AC ripple rate varying from 12% to 28%, and a control group aged solely under a DC field. Our findings indicate that capacitors aged under the DC/AC‐superimposed field exhibited shorter lifespans and more significant capacitance loss than those aged under only the DC field. This difference in performance is primarily attributed to the distinct electrode loss behaviours observed under each ageing condition, which are key factors in the capacitors' capacitance decay. Moreover, the biaxially oriented polypropylene films in the DC‐aged samples showed more severe deterioration, characterised by more noticeable molecular chain scission and reduced breakdown strength, compared to those aged under the DC/AC superimposed field. This difference is partly due to the moderate temperature increase caused by harmonics, which benefits the aggregation structure, and partly to the reduced molecular structure damage from the AC field.
22 December 2025 in Energy & Environmental Science
In situ growth of ultrasmall nanodots via a nanoconfinement strategy enables polymer nanocomposites to achieve superior high-temperature capacitive performance, yielding a discharged energy density of 7.03 J cm −3 at 200 °C with efficiency above 90%.
9 September 2024 in Journal of Materials Chemistry A
The enhancement of the energy storage property of capacitor films at elevated temperature has been considered a critical area of research owing to the essential requirements of capacitor applications. In the present study, a ternary composite system with an improved energy storage property is reported. The ternary composite was composed of PP-graft-AA chains (acrylic acid grafting) and a PP/nano-ZrO2 matrix and was biaxially oriented into a defect-free film with a thickness of 10 μm. The obtained film (BO(PP/AA/Zr)) exhibited an energy storage density of 7.9 J cm−3 at room temperature and maintained a considerably high value of 3.9 J cm−3 at 120 °C. The characterization of charge carrier transportation indicated that the effective biaxial orientation and the introduction of the polar grafted functional group and nanofillers increased the activation energy of molecular chain segment motion and deepened electron trap energy levels, which limited the transportation of charge carriers and significantly enhanced the breakdown strength and energy storage property. Moreover, the designed graft-modified chains (acrylic acid grafted) modified the compatibility between the polymer and inorganic nanofiller, thereby improving the processibility of the defect-free thin film. The results of dynamic mechanical analysis and 2D micro-infrared spectra indicated that the graft-modified chains offset the increased elastic rigidity caused by nanoparticles and facilitated the interaction between inorganic nano-ZrO2 and polymer chains. The study provides a potential solution to the challenge that nanocomposites face during the commercial production of defect-free biaxially oriented films.
14 March 2025 in High Voltage
Metallised film capacitors (MFC) can operate under much higher voltage compared to the foil capacitor due to their self‐healing (SH) properties, which caters to their application with high energy storage density requirement. Excellent results were achieved on the enhancement of the energy storage density of the dielectric material, whereas the SH properties of the modified material were less concerned. In the present study, the simultaneous improvement of the energy storage density and the SH properties were proposed, by constructing double‐layer metallised films of polypropylene (PP) and polymethyl methacrylate (PMMA). The breakdown strength of the PP/PMMA first increased and then decreased with the rising thickness of the PMMA layer. The dielectric constant was also raised because of the introduced ester groups. The highest energy storage density of 5.93 J/cm3 was obtained, which was 62.47% higher than the neat PP, whereas the dielectric loss was maintained around 0.01. The SH properties of PP/PMMA were systematically evaluated, that the SH energy decreased with the increasing PMMA ratio, and the equivalent conductivity at the SH point of the PP/PMMA decreased to only 1% of the neat PP, which largely benefit the stability of the MFC with reduced temperature rise.
14 May 2025 in IEEE Transactions on Power Electronics
The temperature rise of metalized film capacitors (MFCs) is commonly originated from the dielectric loss and conductivity of the dielectric film and metal parts. However, in practical applications, self-healing (SH) point is another inevitable heat source. In this article, the properties of SH points were firstly investigated. The results revealed that the carbon layers, generated during SH process, would increase the equivalent conductivity of SH point up to 10−6 S/m. Accordingly, a thermal model of MFC was established, including a primary part originated from the loss of dielectric and conductivity, and a dynamic part related to the SH points leakage currents. The rising of frequency enhanced both the primary and dynamic part, while the elongation of the ageing time further raised dynamic part. Furthermore, ageing tests were conducted under the dc voltage superimposed with ac harmonics from 0 to 250 Hz. Results showed that the MFC aged solely under dc voltage presented little temperature rise, while the temperature rise under 250 Hz harmonic was 6.6 °C, almost 8 times higher than that under 50 Hz. The study manifested the impacts of SH point to the capacitor thermal behavior, which could contribute to the design and the operation of MFC.