6 February 2026 in IEEE Transactions on Industrial Informatics
In response to the dual bottleneck of difficulty in obtaining the clean signal and extracting key features, which leads to poor denoising effect in mechanical equipment acoustic signal, a novel denoising method based on clean signal virtual sample (CSVS) integrating the dual-path convolutional augmented Transformer (DpConformer) is proposed. The frequency bands that contain more fault information are selected based on the cyclic spectral correlation. Then, the CSVS is generated through the fault characteristic frequency, amplitude distribution, as well as the transmission paths in the mechanical structure and air. Moreover, considering the distinct characteristics of the high- and low-frequency time-frequency features, the convolution module of the Conformer network is enhanced to a dual-path convolution module for facilitating the extraction of the deep global features, the deep low- and high-frequency features. The denoising model is subsequently constructed through the generated CSVS and the noisy signal. Finally, the effectiveness of the proposed method is evaluated using the signal-to-noise ratio (SNR), the prominence degree coefficient (PDC), and the warning accuracy through the experimental data and the actual industrial data. The analysis results show that the SNR, the PDC and the warning accuracy of the proposed method are improved by at least 0.25 dB, 0.04, and 2.5% compared to other denoising methods.