The paper presents a finite control set model predictive current control FCS-MPC for reluctance synchronous motor (RSM). Non-linear characteristics of d-q inductances have been applied to obtain an accurate model of the machine. These were used to calculate the maximum torque per ampere (MTPA) strategy, and to predict the current space vector components for the control algorithm. The proposed control scheme has been implemented in Matlab/Simulink environment supported by the PLECS toolbox. An optimal prediction horizon was selected taking into account the minimization of the motor's torque ripples. Extensive simulation studies indicate high-performance operation of the RSM and torque ripple reduction. Experimental tests are also included.
The present paper investigates the feasibility of utilizing the simplified prediction model for finite control set model predictive current control (FCS-MPCC) applied to reluctance synchronous motors (RSMs). The FCS-MPCC exhibits torque and current ripples, and a crucial consideration is the reduction of these ripples by increasing the switching frequency. The algorithm’s computational complexity is tied to the accuracy of the adopted model. Two approaches with varying levels of accuracy in predicting current dependencies concerning changes in the inductance of the RSM are investigated. The findings highlight the potential of employing simplified fixed inductance values for efficient control in drive systems, particularly those amenable to high switching frequencies.
19 December 2025 in IEEE Transactions on Industrial Electronics
The article presents a gradient enhanced finite control set model predictive current control (GE-FCS-MPCC) strategy for reluctance synchronous motor (RSM) drives. The proposed control method includes gradient optimization of the cost function to improve the operation performance of the drive system. The assumed mathematical model includes the effects of magnetic self- and cross-saturation of the RSM. The algorithm was implemented on a prototype drive system featuring an ARM-Cortex microprocessor and a SiC-based voltage source inverter. Experimental results demonstrate the superior performance of the GE-FCS-MPCC compared with the standard FCS-MPCC and FCS-MPTC, particularly in terms of reduced torque ripples, without deterioration of response dynamics. As a result of the two-stage optimization, an optimal control subspace is obtained with an analytically proven cost function minimum. The proposed solution exhibits good performance with a low computational burden. The impact of the flux/inductance estimation error and measurement time delay is investigated. The experimental results prove the robustness of the proposed control system and its superiority compared with the classical FCS-MPCC and FCS-MPTC schemes.