This paper presents constrained state feedback speed control of a permanent-magnet synchronous motor (PMSM). Based on classical control theory, nonlinear state-space model of PMSM is developed. A simple linearization procedure is employed to design a linear state feedback controller (SFC). Digital redesign of a SFC is carried out to achieve discrete form suitable for implementation in a DSP. Model predictive approach is used to a posteriori constraint introduction into control system. It overcomes limitations of motion control system with nonconstrained SFC resulting in low dynamic properties. The novel concept utilizes machine voltage equation model to calculate the boundary values of control signals which provide permissible values of the future state variables. Secondary control objectives such as zero d-axis current are included. Simulation and experimental results are presented to validate the proposed constrained state feedback control algorithm in comparison to nonconstrained state feedback control and cascade control structure, respectively.
8 July 2014 in IEEE Transactions on Industrial Electronics
This paper presents evolutionary optimization of the linear quadratic regulator (LQR) for a voltage-source inverter with an LC output filter. The procedure involves particle-swarm-based search for the best weighting factors in the quadratic cost function. It is common practice that the weights in the cost function are set using the guess-and-check method. However, it becomes quite challenging, and usually very time-consuming, if there are many auxiliary states added to the system. In order to immunize the system against unbalanced and nonlinear loads, oscillatory terms are incorporated into the control scheme, and this significantly increases the number of weights to be guessed. All controller gains are determined altogether in one LQR procedure call, and the originality reported here refers to evolutionary tuning of the weighting matrix. There is only one penalty factor to be set by the designer during the controller synthesis procedure. This coefficient enables shaping the dynamics of the closed-loop system by penalizing the dynamics of control signals instead of selecting individual weighting factors for augmented state vector components. Simulational tuning and experimental verification (the physical converter at the level of 21 kVA) are included.
24 August 2021 in IEEE Transactions on Transportation Electrification
This article proposes a battery health-aware and deep reinforcement learning (DRL)-based energy management framework for power-split hybrid electric vehicles (HEVs) in a naturalistic driving scenario. First, based on the data collected from the actual traffic flow, a data-driven method is used to establish driving scenarios that reflect different driving patterns and behaviors. Second, the expert knowledge is embedded into the deep deterministic policy gradient (DDPG) to achieve faster convergence with the guaranteed vehicle performance. Third, the superiority of the control strategy is achieved by optimizing the tradeoff among fuel consumption, battery aging cost, and state of charge (SoC) sustainability penalty under different weight coefficients, and verified by comparison with the existing state-of-the-art strategies including the deep Q-network (DQN) and dynamic programing (DP). The results show that the proposed strategy can slow down battery aging by lowering the operating severity factor with minimal fuel economy penalty while remaining accelerated iterative convergence compared with DQN. The benefits of proposed strategy become very evident when the vehicle is driving under the high power demand and it has good stability to cope with the change of operating conditions.
6 July 2012 in IEEE Transactions on Industrial Electronics
In computerized numerical control (CNC) systems, the communication bus between the controller and axis servo drives must offer high bandwidth, noise immunity, and time determinism. More and more CNC systems use real-time Ethernet protocols such as Ethernet Powerlink (EPL). Many modern controllers are closed costly hardware-based solutions. In this paper, the implementation of EPL communication bus in a PC-based CNC system is presented. The CNC system includes a PC, a software CNC controller running under Linux Real-Time Application Interface real-time operating system and servo drives communicating via EPL. The EPL stack was implemented as a real-time kernel module. Due to software-only implementation, this system is a cost-effective solution for a broad range of applications in machine control. All software systems are based on GNU General Public License or Berkeley Software Distribution licenses. Necessary modifications to the EPL stack, Linux configurations, computer basic input/output system, and motherboard configurations were presented. Experimental results of EPL communication cycle jitter on three different PCs were presented. The results confirm good performance of the presented system.
12 February 2018 in IEEE Transactions on Industry Applications
This paper focuses on application of novel nature-inspired optimization algorithms to auto-tuning state feedback speed controller (SFC) for permanent magnet synchronous motor (PMSM). An artificial bee colony (ABC) algorithm and a flower pollination algorithm (FPA) are employed to obtain weighting matrices Q and R elements in linear quadratic regulator (LQR) optimization process. Information concerning principles of operation and influence of the control parameters on the both optimization algorithms are presented. Necessary modifications of ABC and FPA required for their successful application in a field of automatic control of electrical drive are depicted, including introduction of constraint-handling method that assures proper and safety operation of the motor and construction of performance indexes to provide the fulfillment of specified requirements. To the best our knowledge, this is the first time that FPA is applied to auto-tuning process of SFC. On the basis of numerous tests, including simulation and experimental results, it is shown that the ABC is the most useful among the two optimization algorithms to obtain a better performance of the PMSM drive.
1 January 2022 in Renewable and Sustainable Energy Reviews