The paper presents the numerical simulation of an underground excavation in the Callovo-Oxfordian argillaceous formation, performed in the Meuse/Haute-Marne underground research laboratory, within the context of deep geological nuclear waste disposal. The constitutive model adopted incorporates a number of characteristic features of the hydromechanical behaviour of the Callovo-Oxfordian claystone, and other indurated clays, including anisotropy and time-dependent deformations. Model parameters have been largely determined from available experimental results. Particular attention has been given to the incorporation of a non-local formulation in order to simulate localised deformations objectively. It is shown that the numerical analysis is able to provide a very satisfactory reproduction of the extent and configuration of the excavation-induced fractured zone, the development of rock displacements and the evolution of water pressures in the rock. The analysis is also able to provide a deeper insight into the mechanisms underlying the generation of water pressures inside the rock mass.
A sensitivity study is presented to evaluate the influence of different parameters on the simulation of an underground excavation in the Callovo-Oxfordian (COx) argillaceous formation performed in the Meuse/Haute-Marne underground research laboratory. An elasto-viscoplastic constitutive law representing the characteristic behaviour of indurated mudrocks and stiff clays has been employed. It incorporates anisotropy, strain-softening, creep deformations and dependence of permeability on damage. In addition, a non-local formulation, able to simulate localised deformations objectively, has been incorporated in the analyses. The following features affecting the excavation have been studied: initial stress, strength and stiffness anisotropy, strength parameters, hydraulic and hydromechanical parameters, and scale effects. A simulation reported in a companion paper provides the base case for benchmarking. The results are compared in terms of extent and configuration of the excavation fractured zone, vertical and horizontal tunnel convergences, and the development and evolution of pore pressures in the rock. From the comparisons, an enhanced understanding of the hydromechanical mechanisms associated with underground excavations in COx claystone, and other similar argillaceous materials, has been achieved.
The paper presents the enhancement of an existing constitutive model for argillaceous hard soils–weak rocks to incorporate non-isothermal conditions, to be used in coupled thermo-hydro-mechanical (THM) simulations of underground excavations subjected to temperature variations within the context of deep geological nuclear waste disposal. The proposed thermo-elastoplastic extension accounts for the effect of temperature on the yield and plastic potential functions and on the elastic stiffness. The resulting model is validated through the simulation of relevant non-isothermal laboratory tests reported in the literature. The model is then applied to the coupled THM simulation of an in situ heating test conducted at the Meuse/Haute-Marne underground research laboratory in Bure, France, excavated in the Callovo-Oxfordian claystone. Results show that the incorporation of thermal effects into the constitutive description of the host rock plays a significant role in the behaviour of the excavation when subjected to thermal loading, particularly in the evolution of the excavation fractured zone.