23 April 2025 in IEEE Transactions on Wireless Communications
Due to their highly flexible deployment and agility features, unmanned aerial vehicles (UAVs) serving as aerial base stations are increasingly being used in challenging environments, including emergency communication, traffic offloading, and failures of existing communications infrastructure. A reliable and effective communication service requires 3D deployment and autonomous UAV trajectory optimization in each time slot. While most prior approaches focus on trajectory design that maximizes communication coverage or network throughput without considering fairness as well as computation time. This paper presents a multi-UAV trajectory control and fair communication (TCFC) scheme that maximizes ground user data rate and communication coverage while ensuring service fairness in a UAV-aided wireless communications system. The proposed TCFC scheme employs a two-stage learning approach. Firstly, it develops a gated recurrent unit-based link quality estimation model to assess each user’s link quality over time. Then, a federated multi-agent deep reinforcement learning (FedMADRL) algorithm is utilized to continuously adjust the trajectory of the UAVs, optimizing communication performance. We evaluated our proposed system using real channel measurement data, i.e., amplitude and phase signal information. The results show that the proposed TCFC scheme reduces computation time by 26.91% and provides comparable network performance with the baseline methods while improving DRL agents’ privacy.
18 November 2020 in IEEE Transactions on Mobile Computing
We introduce RFEye, a generalized technique to locate signals independent of the waveform, using a single Unmanned Aerial Vehicle (UAV) equipped with only one omnidirectional antenna. This is achieved by acquiring signals from uncoordinated positions within a sphere of 1-meter radius at two nearby locations and formulating asynchronous, distributed receiver beamforming at the UAV to compute the Direction of Arrival (DoA) from the unknown transmitter. The proposed method includes four steps: 1) Blind detection and extraction of unique signature in the signal to be localized, 2) Asynchronous signal acquisition and conditioning, 3) DoA calculation by creating a virtual distributed antenna array at UAV and 4) Obtaining position fix of emitter using DoA from two locations. These steps are analyzed for various sources of error, computational complexity and compared with widely used signal subspace-based DoA estimation algorithms. RFEye is implemented using an Intel-Aero UAV, equipped with a USRP B205 software-defined radio to acquire signals from a ground emitter. Practical outdoor experiments show that RFEye achieves a median accuracy of 1.03m in 2D and 2.5m in 3D for Wi-Fi, and 1.15m in 2D and 2.7m in 3D for LoRa waveforms, and is robust to external factors like wind and UAV position errors.
17 October 2024 in IEEE Transactions on Machine Learning in Communications and Networking
Terahertz (THz) band communication is envisioned as one of the leading technologies to meet the exponentially growing data rate requirements of emerging and future wireless communication networks. Utilizing the contiguous bandwidth available at THz frequencies requires a transceiver design tailored to tackle issues existing at these frequencies such as strong propagation and absorption loss, small scale fading (e.g. scattering, reflection, refraction), hardware non-linearity, etc. In prior works, multicarrier waveforms (e.g., Orthogonal Frequency Division Multiplexing (OFDM)) are shown to be efficient in tackling some of these issues. However, OFDM introduces a drawback in the form of peak-to-average power ratio (PAPR) which, compounded with strong propagation and absorption loss and high noise power due to large bandwidth at THz and sub-THz frequencies, severely limits link distances and, in turn, capacity, preventing efficient bandwidth usage. In this work, we propose TWIRLD - a deep learning (DL)-based joint optimization method, modeled and implemented as components of end-to-end transceiver chain. TWIRLD performs a symbol remapping at baseband of OFDM signals, which increases average transmit power while also optimizing the bit error rate (BER). We provide theoretical analysis, statistical equivalence of TWIRLD to the ideal receiver, and comprehensive complexity and footprint estimates. We validate TWIRLD in simulation showing link distance improvement of up to 91% and compare the results with legacy and state of the art methods and their enhanced versions. Finally, TWIRLD is validated with over the air (OTA) communication using a state-of-the-art testbed at 140 GHz up to a bandwidth of 5 GHz where we observe improvement of up to 79% in link distance accommodating for practical channel and other transmission losses.
14 December 2023 in IEEE Transactions on Machine Learning in Communications and Networking
Wireless signals are vulnerable to various security threats, like eavesdropping and jamming, due to the inherent broadcast nature of the wireless channel. Encryption may ensure the confidentiality of the data but does not guarantee successful communication among legitimate users in the presence of strong adversaries, like wideband jammers. In this scenario, hiding a secret signal in presence of another mundane ongoing communication is one of the ways to minimize its chances of getting intercepted. Wireless Steganography is a process of embedding a secret signal inside another signal that acts as a cover to hide the signal of interest. In this paper, we propose to encode secret bits into covert signals that are statistically indistinguishable from a hardware noise generated by a low-cost transmitter. As the covert signal resembles hardware noise, it can be transmitted over any waveform, making it adaptable and portable to any communication link. Each generated complex signal sample is merged with a cover signal sample, yielding a 50% embedding rate. We create the encoding and decoding models by creating a pair of complex-valued neural networks (NNs), which is trained in presence of another NN model, critic. The critic model differentiates between true hardware noise and encoder-generated covert signal, thus providing essential feedback to the NN pair to improve the encoding technique. The decoder undergoes a transfer learning process to adapt to the residual channel effects in over-the-air experiments. In an indoor testbed, we successfully decoded the covert communication that mimics a range of hardware noises and is transmitted using different modulation orders of cover OFDM waveform. Our steganalysis indicates that the covert signal can be generated to mimic specific hardware, which remains indistinguishable in different statistical tests. Our method performs an order of magnitude better in statistical steganalysis compared to the state-of-the-art method in this field.
3 June 2025 in IEEE Open Journal of the Communications Society
Accurate detection of unknown signals in low signal-to-noise ratio environments has utility in many wireless applications, such as opportunistic spectrum sharing, signal localization, and operations in long-range scenarios. Existing methods rely largely on signal processing-based techniques that perform poorly at lower energies, or machine learning techniques that rely on well-structured, offline training data with known signal labels sufficient for model training. This is impractical in environments where labeled training data is limited or difficult to obtain, such as for the detection of unknown signals that may or may not have been previously observed. To overcome these challenges, this paper introduces a novel feedback architecture for pseudo-label generation in an online-learning paradigm to detect wireless signals without a priori signal knowledge or model pre-training. The methodology improves upon digital signal processing-based techniques in low-energy detection, and performs within 3 dB of deep learning-based models trained with known signal labels, without similar limitations. The iterative architecture exhibits generalized learning as new, unknown signals are introduced to its online detection method. It is generalized for varying waveforms, sequence lengths and timing offsets, and its practical design and implementation make it ready for adoption in realistic scenarios.