The ultrasonic guided wave method is successfully used for structural health monitoring (SHM) of aircraft structures utilizing PZT (Pb-Zr-Ti based piezoceramic material) sensors for guided wave generation and detection. To increase the mechanical durability of the sensors in operational conditions, this paper demonstrates the feasibility of the integration of PZTs into the Glass fiber/Polymethyl methacrylate (G/PMMA) composite plate and evaluates the possibility of impact damage detection using generated guided waves. Two types of PZT sensors were embedded into different layers during the manufacturing process. Generally, radial mode disc sensors are used for Lamb wave generation, and thickness-shear square-shaped sensors are used for both Lamb and shear wave generation. First, the wave propagation was analyzed considering the sensor type and sensor placement within the layup. The main objective was to propose the optimal sensor network with embedded sensors for successful impact damage detection. Lamb wave frequency tuning of disk sensors and unique vibrational characteristics of integrated shear sensors were exploited to selectively actuate only one guided wave mode. Finally, the Reconstruction Algorithm for the Probabilistic Inspection of Damage (RAPID) was utilized for damage localization and visualization.
Composite materials including sandwich panels can offer a number of advantages such as excellent strength to mass ratio or stiffness to mass ratio. Sandwich panels can find their application in many industrial sectors where the mass and mechanical properties are critical. Despite these and many other advantages, the use of sandwich panels is associated with many problems, which stem from their structural composition (weak core with high shear stiffness connecting two skins with high in plane stiffness). This composition can cause problems in joining the sandwich panels to each other and to other parts by means of mechanical joints. To solve these problems, there exist many accessories such as inserts. The main objective of this paper is to present the development, manufacturing, and testing of plastic inserts for sandwich panels made by Fused Deposition Modelling 3D printing technology.