A Heusler Fe2V1-xWxAl sintered alloy was synthesized to evaluate the effect of W substitution on thermoelectric properties of the Heusler alloy. The Seebeck coefficient and the electrical conductivity are simultaneously enhanced through electron injection resulting from the W substitution. Comparison with the Si-substituted Fe2VAl alloy reveals that the additional electronic states derived from W 5d orbital in the vicinity of pseudogap are likely to degrade the Seebeck coefficient. Thermal conductivity is effectively reduced by the W substitution because of the large atomic mass and volume of W compared to the constituent elements of Fe2VAl alloy. The appreciable reduction of thermal conductivity, without a serious deterioration in electrical conduction, enhances the thermoelectric figure of merit in the Heusler alloy.
1 February 2017 in Journal of Alloys and Compounds
In order to solve the problem of coercivity decrease during sintering, we developed a low-oxygen process capable of producing sintered compacts while avoiding oxidization. This study proved that Sm2Fe17N3 sintered compacts produced by the low-oxygen process maintained the coercivity of the raw powder. Scanning transmission electron microscopy observation found no obvious formation of an oxide layer at the sintered interfaces. Magnetic measurements revealed that the coercivity of the sintered magnets decreased as the oxygen concentration increased. In summary, this study demonstrated that Sm2Fe17N3 sintered magnets having the same coercivity as the raw powder can be produced by avoiding oxidization.