12 January 2015 in Applied Physics Letters
The synchronization of 15 parallel high gain gallium arsenide photoconductive semiconductor switches (GaAs PCSS) has been researched aiming to get higher output voltage. Each PCSS is triggered independently by a high power pulse laser diode. The pulse width, energy, peak power, and central wavelength of the laser pulse are approximately 18 ns, 360 μJ, 20 kW, and 905 nm, respectively. In the stacked Blumlein transmission lines structure, the synchronous conduction of 15 parallel GaAs PCSSs has been achieved by offering optimized bias voltage and laser parameters. The method of synchronization calculation is given, and the synchronization of the 15 parallel GaAs PCSSs is measured as 775 ps. Furthermore, influences of the bias voltage, laser parameters on the synchronization are analyzed. In the output terminal, superimposed by the output voltages of 15 Blumlein transmission lines, the total output voltage reaches up to 328 kV, which is the highest output voltage of GaAs PCSSs that has been reported so far.
1 May 2015 in Review of Scientific Instruments
Compact solid-state system is the main development trend in pulsed power technologies. A compact solid-state high-voltage nanosecond pulse generator with output voltage of 300 kV amplitude, 10 ns duration (FWHM), and 3 ns rise-time was designed for a dielectric wall accelerator. The generator is stacked by 15 planar-plate Blumlein pulse forming lines (PFL). Each Blumlein PFL consists of two solid-state planar transmission lines, a GaAs photoconductive semiconductor switch, and a laser diode trigger. The key components of the generator and the experimental results are reported in this paper.
19 April 2011 in Applied Physics B
12 April 2019 in IEEE Transactions on Plasma Science
This paper presents an experimental study on the failure mechanism of high-current gallium arsenide photoconductive semiconductor switches (GaAs PCSSs) triggered by the laser diode. We propose a Blumlein pulse forming line to test the GaAs PCSS. The result shows that the damage of GaAs PCSS almost occurs at the anode under the circumstances that either anode or cathode is illuminated, since the highest amplitude of Gunn oscillation always occurs on the anode. We speculate that the failure of high-current GaAs PCSS is attributed to the Gunn effect according to the statistics about failure factors of GaAs PCSS. We use a scanning electron microscope to semiquantitatively analyze the compositions of the erosions microball or granules, which are gallium and arsenium. The result proves our speculation.
8 April 2019 in High Power Laser Science and Engineering
FM-to-AM (frequency modulation-to-amplitude modulation) conversion caused by nonuniform spectral transmission of broadband beam is harmful to high-power laser facility. Smoothing by spectral dispersion (SSD) beam is a special broadband beam for its monochromatic feature at the given time and space on the near field. The traditional method which uses the optical spectral transfer function as filters cannot accurately describe its AM characteristics. This paper presents the theoretical analysis of the etalon effect for SSD beam. With a low-order approximation, the analytic model of the temporal shape of SSD beam is obtained for the first time, which gives the detailed AM characteristics at local and integral aspects, such as the variation of ripples width and amplitude in general situation. We also analyze the FM-to-AM conversion on the focal plane; in the focusing process, the lens simply acts as an integrator to smooth the AM of SSD beam. Because AM control is necessary for the near field to avoid optics damage and for the far field to ensure an optimal interaction of laser–target, our investigations could provide some important phenomena and rules for pulse shape control.
1 May 2020 in Review of Scientific Instruments
By utilizing the radio-frequency metal-oxide-semiconductor field-effect transistor switch, the multi-stage stacked printed circuit board Blumlein lines, and the induction voltage adder, a voltage generator with MHz repetition rates and nanosecond duration was designed and fabricated. The shunting current of the multi-stage stacked Blumlein lines, which consists of the coupling current at the load ends and the leakage current at the switch ends, is clarified. The circuit simulation and experiment of the three-stage stacked Blumlein lines are carried out; the result shows that the experiment and simulation agree well. The five-stage IVA prototype is designed for generating voltage pulses of ∼10 kV in amplitude and 8–11 ns in duration with MHz burst repetition rates. The voltage generator with MHz repetition rates and nanosecond duration demonstrated an important application prospect to reduce the electron beam initial emittance of the high energy accelerator.