2 November 2023 in Tribology Transactions
15 February 2023 in Tribologie und Schmierungstechnik
In this work, the friction behavior of chain joints with triboactively coated pins was analyzed. For this purpose, the nitride hard coating (Cr,Al)N+Mo, produced by means of a PVD process, was investigated. A sulfur-added model grease was used for lubrication. This is to produce tribochemical transfer coatings that are transferred from the chain pin to the sleeve under tribological loading. As a reference, measurements were also carried out on a (Cr,Al)N coating system and on uncoated samples. Various normal forces, sliding speeds and temperatures were also considered as further influencing variables. The frictional torques were determined using the chain joint tribometer deve loped at the Chair of Machine Elements, Gears and Tribology (MEGT).
31 December 2025 in Tribology International
17 July 2025 in Forschung im Ingenieurwesen
The contact between pin and bushing mainly determines the efficiency, but also the wear behavior of joint chains like roller chains. Since boundary friction predominantly occurs in chain joints, the conformity of the contact and thus the shape quality of the components has a major influence on the tribological system. The investigations carried out here show the significant influence of the joint quality on the tribological behavior under different load conditions and lubrication regimes. Wear rates can be significantly reduced by using components of high shape conformity and the service life can be increased by up to 13.3 times. High-quality chains also exhibit stable friction behavior, even with progressive wear. Optimizing the joint contact therefore offers great potential for increasing the service life and improving the sustainability of the tribological system by reducing friction and the amount of lubricant used.
1 January 2026 in Journal of Science and Cycling
The rapid electrification of bicycles has fundamentally transformed drivetrain dynamics, leading to significantly higher loads on mechanical components such as chains. Unlike in traditional bicycles, where wear and efficiency losses primarily concerned competitive riders, the widespread adoption of e-bikes and other high-performance bicycles has made these issues critical for everyday cycling. Increased torque and sustained power assistance place unprecedented mechanical and tribological demands on drivetrains, making durability, friction reduction, and efficiency vital considerations for both manufacturers and users. As a result, research and testing methods that were once used mainly for industrial chain applications are increasingly relevant for the cycling industry. This study addresses these emerging challenges by adapting proven methodologies from mechanical and automotive engineering. Through controlled laboratory testing, bicycle chains and lubricants can be evaluated under standardized conditions that replicate real-world usage scenarios. Such testing does not only enable precise comparisons between different chain and lubricant systems but also provides insight into the fundamental wear mechanisms and efficiency losses occurring under varying loads, speeds, and environmental conditions. The approach supports the tailored design of drivetrain components for diverse cycling applications, including urban e-bikes, high-speed track bicycles, and rugged mountain bikes. By bridging disciplines, this work paves the way for innovations that enhance performance, reliability, and sustainability in modern cycling. A model procedure is presented here based on three exemplary high-speed track-bike scenarios. The focus is on the implementation of the experimental strategy and the derivation of the methodology. .