1 March 2008 in Journal of Guidance, Control, and Dynamics
1 November 2011 in Journal of Vacuum Science & Technology B
In extreme-ultraviolet (EUV) lithography, defect-free mask production is a critical issue for high-volume manufacturing. For mask inspection and metrology, we have developed a coherent EUV scatterometry microscope (CSM). It is a simple lensless system. An aerial image of the mask pattern is reconstructed with iterative calculation based on coherent diffraction imaging. Periodic patterns, aperiodic patterns, and phase structures were reconstructed well by the CSM. A defect in a line-and-space pattern was detected as a diffraction signal. The aerial image of the defect is also reconstructed. This paper demonstrates the capability of the CSM to observe complex diffraction amplitudes directly from the pattern and the defect.
24 June 2019 in Journal of Photopolymer Science and Technology
Japan's largest platform for academic e-journals: J-STAGE is a full text database for reviewed academic papers published by Japanese societies
30 June 2002 in Japanese Journal of Applied Physics
24 June 2019 in Journal of Photopolymer Science and Technology
The resist development is a critical issue in EUV lithography for high volume manufacturing of semiconductor devices. Especially, the resist should have low line-width roughness (LWR) performance in fine patterning. To reduce the LWR, it is significant to control and reduce the stochastic behavior in the resist material. We employed the resonant soft X-ray scattering (RSoXS) method to evaluate the non-uniformity of the resist material components such as base polymer, functional group, and photo-acid generator and so on. In RSoXS method, the soft X-ray scattering intensity from the resist is recorded by a CCD camera, which the incident photon energy irradiated to the resist sample was varied around the carbon absorption K-edge of 284 eV. Around the carbon absorption edge, the absorption spectrum had resonant absorption peaks that depended on the chemical bonding structure of carbon. The scattering signal profile of a commercial chemical-amplified resist was different at each absorption peaks, which indicated non-uniformity of resist material. Thus, the non-uniformity of the resist material was measured by RSoXS method, which was important for development of low LWR resist.
1 December 1993 in Japanese Journal of Applied Physics
Poly (methylmethacrylate) (PMMA) resist performance for soft X-ray projection lithography (SXPL) at an exposure wavelength of 13 nm was investigated with an special emphasis on development condition dependence. The resist contrast value γ for 13 nm SXPL showed strong dependence on the developer, in contrast with proximity X-ray lithography (XRL) at the peak-wavelength of 0.7 nm. With an optimized developer, a resolution as high as 0.05 µm was achieved. A wide focus range of 1.5 µm with a 0.1 µm line-and-space pattern was also confirmed.