Globally, the growing volume of waste tires and plastics has posed significant concerns about their sustainable and economical disposal. Pyrolysis provides a way for effective treatment and management of these wastes, enabling recovery of energy and produces solid pyrolytic char as a by-product. The use of pyrolytic chars in asphalt binder modification has recently gained significant interest among researchers. As asphalt binder aging influences the cracking, rutting, and moisture damage performance of asphalt binder and the mixtures, evaluation of aging characteristics of char modified asphalt binders is quite important. The main objective of this study is the investigation of the aging characteristics of asphalt binders modified with waste tire pyrolytic char (TPC) and waste plastic pyrolytic char (PPC) through rheological and spectroscopic evaluations. To imitate short-term and long-term aging conditions, the asphalt binders were first treated in a rolling thin film oven (RTFO) and then in a pressure aging vessel (PAV). The aging characteristics were determined using four rheological aging indices based on complex modulus (G*), phase angle (δ), zero shear viscosity (ZSV), and non-recoverable creep compliance (Jnr) from multiple stress creep and recovery (MSCR) test. The fatigue cracking potential was then measured through binder yield energy test (BYET). These parameters were measured through a dynamic shear rheometer. Fourier transform infrared (FTIR) and proton nuclear magnetic resonance (1H-NMR) spectroscopy analyses were then used to investigate changes in chemical composition due to aging in the char modified binders. Both TPC and PPC improved the high-temperature deformation resistance properties of asphalt binder. The TPC-modified binder showed better aging resistance than the control and PPC-modified binders, based on the different rheological and spectroscopic indices. The pyrolytic char modified binders also demonstrated good fatigue performance.
19 March 2020 in Road Materials and Pavement Design
Ethylene–propylene–diene–monomer (EPDM) is a high-quality synthetic rubber widely used in non-tyre automotive parts. Waste EPDM rubber is generated at several industries, manufacturing units, and automobile repair/service stations. The present study aims at the evaluation of asphalt binders and mixes with waste EPDM as a modifier. Modification was attempted with four EPDM contents (2%, 4%, 6% and 8% by binder weight). Storage stability was checked for the modified blends with and without a crosslinking agent (sulphur). Binder characterisation was done through penetration, softening point, temperature and frequency sweeps, master curve, multiple stress creep recovery, Burger’s model fit, and binder yield energy tests. Performance of bituminous mixtures with EPDM-modified binders was also evaluated through Hamburg wheel tracking, stiffness modulus, and indirect tensile strength tests. The incorporation of EPDM enhanced the rutting and fatigue performance of the binder. Mixtures showed better stiffness, rutting resistance and tensile strength compared to those with control mixes.
13 March 2024 in European Journal of Environmental and Civil Engineering
1. Asphalt pavements are the most used pavement type worldwide. These pavements are constructed using granular courses on compacted soil subgrades, followed by asphalt-bound courses. However, durin...
1 October 2022 in Journal of Materials in Civil Engineering
This study evaluated tire pyrolytic oil (TPO) derived from waste tire pyrolysis as a rejuvenating agent for three types of aged asphalt binders (unmodified, polymer-modified, and crumb rubber–modified). Gas chromatography–mass spectrometry (GC–MS) was performed to identify chemical compounds present in TPO. The rheological characteristics of all binders were examined through the complex viscosity–frequency profile, zero-shear viscosity, failure temperature, Black space diagrams, Cole–Cole plots, Superpave fatigue parameter, Glover–Rowe parameter, and linear amplitude sweep (LAS) tests. Mass loss was also determined for the rejuvenated binders. All binders were subjected to Fourier transform infrared (FTIR) analysis, and sulfoxide and carbonyl indices were computed. Atomic force microscopy (AFM) was conducted to study the effect of TPO on the micromorphology of the binders. The normalized Euclidean distance approach was used to rank the rejuvenated binders with respect to the proximity of their rheological and FTIR characteristics to that of the unaged binder. The use of TPO as a rejuvenating agent enabled the aged binders to achieve properties comparable to those of the unaged asphalt binder. The AFM-based rejuvenation index (RI) indicated a good potential of TPO as a rejuvenator. The results of the binder rheological parameters and the FTIR indicators investigated in the study indicated that a 9% dosage of TPO as a rejuvenating agent was the most effective.
17 May 2023 in Transportation Research Record: Journal of the Transportation Research Board
Open-graded friction courses (OGFCs) are asphalt paving mixes with a higher number of interconnecting air voids to provide advantages with respect to improved drainage, increased dry/wet surface friction resistance, decreased splash and spray, and reduced aquaplaning. However, binder draindown has been a recurring issue during the manufacture, storage, transportation, and service life of OGFC mixtures. The addition of stabilizers in the form of fiber is often used with OGFC mixes to counteract the draindown. Increasing environmental awareness, the depletion of fossil resources, and the rise of global waste problems have necessitated the use of locally accessible natural fibers as an alternative to expensive synthetic fibers. In this study, the banana fiber obtained from the waste pseudo-stem of the banana plant post-harvesting and the sugarcane bagasse fiber obtained from the post-residual after sugar extraction is explored along with a commercial cellulose fiber to evaluate the draindown characteristics of OGFC mixtures. A cone penetration test and fiber absorption test was performed on the fiber-mixed asphalt binder. The draindown characteristics of 168 combinations of OGFC mixes were evaluated considering various parameters, viz. fiber parameters (types, lengths, dosages), binder dosage, binder types (unmodified binder and polymer-modified binder), and time period. Finally, a statistical analysis was conducted to determine the efficacy of different influencing factors. The best performance was exhibited by banana fiber, which had a dosage of 0.45% and a length of 9 mm, followed by sugarcane bagasse and cellulose fiber. All the input factors were found to be statistically significant.
1 May 2023 in Journal of Materials in Civil Engineering