Ashish Sharma

Ashish Sharma

Auto-generated profile, based on publicly available information

Ashish Sharma

Department of Civil Engineering, Indian Institute of Technology 1 , Guwahati, Assam 781039

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 May 2023 in Transportation Research Record: Journal of the Transportation Research Board
Verified
Journal Article
Closed access
ASAshish Sharma
Ashish Sharma
RCRajan Choudhary
Rajan Choudhary
AKAnkush Kumar
Ankush Kumar
Open-graded friction courses (OGFCs) are asphalt paving mixes with a higher number of interconnecting air voids to provide advantages with respect to improved drainage, increased dry/wet surface friction resistance, decreased splash and spray, and reduced aquaplaning. However, binder draindown has been a recurring issue during the manufacture, storage, transportation, and service life of OGFC mixtures. The addition of stabilizers in the form of fiber is often used with OGFC mixes to counteract the draindown. Increasing environmental awareness, the depletion of fossil resources, and the rise of global waste problems have necessitated the use of locally accessible natural fibers as an alternative to expensive synthetic fibers. In this study, the banana fiber obtained from the waste pseudo-stem of the banana plant post-harvesting and the sugarcane bagasse fiber obtained from the post-residual after sugar extraction is explored along with a commercial cellulose fiber to evaluate the draindown characteristics of OGFC mixtures. A cone penetration test and fiber absorption test was performed on the fiber-mixed asphalt binder. The draindown characteristics of 168 combinations of OGFC mixes were evaluated considering various parameters, viz. fiber parameters (types, lengths, dosages), binder dosage, binder types (unmodified binder and polymer-modified binder), and time period. Finally, a statistical analysis was conducted to determine the efficacy of different influencing factors. The best performance was exhibited by banana fiber, which had a dosage of 0.45% and a length of 9 mm, followed by sugarcane bagasse and cellulose fiber. All the input factors were found to be statistically significant.

9 May 2024 in Transportation Research Record: Journal of the Transportation Research Board
Verified
Journal Article
Closed access
SDSaswat Biswapriya Dash
Saswat Biswapriya Dash
RCRajan Choudhary
Rajan Choudhary
AKAnkush Kumar
Ankush Kumar
ASAshish Sharma
Ashish Sharma
An asphalt mix comprises asphalt binder and aggregates of different sizes (coarse and fine) and filler. Even with a smaller share, filler plays a crucial role in the performance of asphalt-filler mastics. The study is motivated by the growing need to preserve natural resources and aims to investigate the utilization of four different industrial by-products/wastes (electric arc furnace slag filler, basic oxygen furnace slag filler, tire pyrolysis char filler, and plastic pyrolysis char filler, and one conventional natural stone aggregate filler (NSAF) in asphalt-filler mastics. Four conditioning environments were used to characterize the chemo-rheological properties of the mastics formulated by these five different fillers: unaged, long-term aged, freeze-thaw, and freeze-thaw of long-term aged mastics. To understand the significance of filler attributes in the filler-asphalt mastic performance, a correlation between various filler characteristics (specific surface area, Rigden voids, methylene blue value, and hydrophilic coefficient) and the mastic properties (multiple stress creep and recovery, linear amplitude sweep, binder yield energy test, and Fourier transform infrared spectroscopy) was also attempted. The fatigue life and elastic recovery of the mastics were negatively affected by the combined effects of aging and moisture. The filler characteristics showed a negligible-to-low association with fatigue parameters and a good correlation with rutting performance. The use of these industry co-products/by-products as fillers is supported by the superior rutting and fatigue performance of steel slag and pyrolytic char fillers compared with the traditional NSAF.

7 February 2025 in Journal of Testing and Evaluation
Verified
Journal Article
Closed access
ASAshish Sharma
Ashish Sharma
RCRajan Choudhary
Rajan Choudhary
AKAnkush Kumar
Ankush Kumar
SDSaswat Biswapriya Dash
Saswat Biswapriya Dash
Open-graded asphalt friction courses (OGAFCs) offer benefits in terms of the absence of rainwater film, high skid resistance, low tire-pavement interaction noise, and better visibility under wet weather. Among the critical problems of binder draindown, raveling, and clogging encountered with OGAFCs, binder draindown is the one that can be largely resolved by using fiber with appropriate length, dosage, and type. With the growing interest in sustainable materials in road construction, the application of agro waste–derived natural fibers in pavements forms an innovative domain of research. In this study, four agro waste–derived biofibers, including banana fiber, sisal fiber, sunnhemp fiber, and pineapple fiber, were investigated as stabilizing agents to address the binder draindown challenge within OGAFC mixes. A response surface methodology (RSM) was used to optimize the fiber parameters of four agro waste–derived fibers for their application in OGAFC mixtures fabricated with unmodified and polymer-modified binders. RSM-based models were developed using three distinct input parameters: fiber lengths ranging from 3 to 12 mm, fiber dosages ranging from 0.15 to 0.45 %, and binder dosages ranging from 5.5 to 6.5 %, as well as one output parameter, binder draindown. The RSM-based developed regression models were statistically significant, with average R2 and adjusted R2 values higher than 0.9830 and 0.9695, respectively. Furthermore, the desirability function used to optimize fiber parameters yielded a desirability value greater than 0.84 for each developed model, indicating an exceptional level of predictive precision. Finally, during the model validation phase, an average percentage error deviation of 5.61 % demonstrated the efficacy of the RSM approach for fiber parameter optimization. The RSM-based optimization for each model with both binders, followed by parameter validation, yielded optimal values of 0.45 %, 9 mm, and 5.5 % for fiber dosage, fiber length, and binder dosages, respectively.

16 December 2024 in Journal of Testing and Evaluation
Verified
Journal Article
Closed access
PDF file
ASAshish Sharma
Ashish Sharma
RCRajan Choudhary
Rajan Choudhary
AKAnkush Kumar
Ankush Kumar
SDSaswat Biswapriya Dash
Saswat Biswapriya Dash
As an agrarian economy, India produces the second-largest amount of agricultural waste globally. The practices of indiscriminately disposing of this waste in open lands or burning it in agricultural fields give rise to significant environmental and health concerns. With an increasing need for sustainable road construction materials and practices, engineers are continuously looking for the use of agricultural and plantation-based resources, particularly natural fibers. In order to address problems like binder draindown and raveling associated with high binder content and low fine content, this study focuses on the open-graded friction course (OGFC), which incorporates fibers. Under the investigation on the potential applications of natural fibers, including banana fiber (BNF), sisal fiber (SIF), pineapple fiber (PNF), sunn hemp fiber (SHF), and cellulose fiber (CLF), the study assesses various mix design parameters across 12 combinations, including bulk density, air voids, stone-on-stone contact, binder draindown, and abrasion loss (aged and unaged) at different binder contents, fiber lengths, and dosages. Results indicate an optimum binder content of 6.0 % for all fiber-reinforced OGFC mixes. Grey relational analysis and indirect tensile strength (ITS) tests further validate the improved performance of these mixes, showcasing reduced draindown, and abrasion loss, and enhanced ITS with the incorporation of natural fibers. The comprehensive evaluation of mix design properties ranks BNF as the top-performing, followed by PNF, SIF, and SHF, as indicated by the grey relational grade. This research emphasizes the potential of using agricultural waste for sustainable infrastructure development and promoting eco-friendly practices in the construction industry.

1 March 2026 in Journal of Materials in Civil Engineering
Verified
Journal Article
Closed access
ASAshish Sharma
Ashish Sharma
RCRajan Choudhary
Rajan Choudhary
SDSaswat Biswapriya Dash
Saswat Biswapriya Dash
AKAnkush Kumar
Ankush Kumar

1 November 2023
Verified
Conference Paper
Closed access
STShivam Tiwari
Shivam Tiwari
ASAshish Sharma
Ashish Sharma
BBBarkha Bhardwaj
Barkha Bhardwaj
PSPooja Singh
Pooja Singh
STSudhanshu Tripathi
Sudhanshu Tripathi
In order to ensure a sustainable future, renewable energy sources and smart grid systems are crucial. However, the dynamic nature of these systems makes it challenging to maintain their stability. This research work proposes the utilization of algorithms based on machine learning to model the grids considered as smart systems and predict their stability. The dataset used contains features related to sources of renewable energy and power consumption, with the constancy status of the smart grid system being the target variable. Five different algorithms of machine learning were appraised by means of working metrics like AUC, F1-score, precision and accuracy. The outcomes confirmed that the Decision Tree, Random Forest, and C4.5 algorithms achieved excellent execution with a correctness of 99.97% and 0.9997 AUC. This study features the effectiveness of algorithms of machine learning in modeling and forecasting the smart grid systems stability, which can assist in the design and development of further proficient and reliable renewable energy practices. The future scope of this study includes incorporating more advanced machine learning techniques and analyzing real-time data to enhance the accuracy of the model.