5 January 2016 in Energy & Environmental Science
We demonstrated a 4 cm2aperture area perovskite solar module with a PCE of 13.6% and a geometrical fill factor of 91%.
27 April 2018 in Journal of Materials Chemistry A
This review summarized the recent progress in 2D/quasi-2D layered metal halide perovskites for solar cells.
30 September 2015 in Journal of Materials Chemistry A
TiO 2 layer made by e-beam induced evaporation is demonstrated as an ETL in high efficiency planar junction perovskite solar cells.
23 April 2019 in Advanced Materials
21 March 2018 in Energy & Environmental Science
Perovskite–silicon tandem solar cells are potentially attractive, inexpensive solutions to surpass the power conversion efficiency limits of market-leading silicon solar cells. While such tandem solar cells have been demonstrated to reach high efficiencies, they require advanced light management to utilise the solar spectrum efficiently. Moreover, area upscaling with minimal optical losses is necessary to transfer the properties of lab scale devices to commercial scale products. Here, we demonstrate four-terminal perovskite–silicon tandem solar modules with efficient light management. With rigorous optical simulations of the complete tandem stack, we design light management concepts that minimise overall reflection and enhance complementary absorption of the subcells. The optical optimisation results in four-terminal tandem power conversion efficiencies of 25.3% on 0.13 cm2 and 23.9% on 4 cm2, both exceeding the stand-alone silicon solar cell power conversion efficiency of 23.0%.
8 November 2017 in Materials Chemistry Frontiers
Due to the quantum confinement effects, the bandgap of two-dimensional (2D) perovskites increases when the thickness of the inorganic slabs decreases. This could result in insufficient light absorption that limits the overall performance of perovskite solar cells. Here we report a series of small bandgap 2D perovskites using mixed butylammonium (BA) and formamidinium (FA) cations, i.e. (BA)2(FA)n−1PbnI3n+1 (n = 1–5). In particular, 2D perovskite (BA)2(FA)2Pb3I10 shows a small bandgap of 1.51 eV, which is comparable to state-of-the-art three-dimensional perovskites. A strongly preferential out-of-plane crystallographic alignment of the inorganic perovskite component in the (BA)2(FA)2Pb3I10 film is achieved by the addition of thiourea in the precursor. This significantly improves charge transport and thus leads to highly efficient inverted solar cells with a planar structure of ITO/PEDOT:PSS/(BA)2(FA)2Pb3I10/PC61BM/BCP/Ag. With the best power conversion efficiency of 6.88%, we demonstrated the highest PCE reported for FA based low-n (n < 4) 2D perovskite solar cells. By virtue of the stable 2D perovskites, the unencapsulated device retains 80% efficiency after storing in air with a humidity of 25 ± 5% for 25 days, indicating excellent stability against moisture and oxygen.