This paper presents a non-isothermal, non-Newtonian Computational Fluid Dynamics (CFD) model for the mixing of a highly viscous polymer suspension in a partially filled sigma blade mixer. The model accounts for viscous heating and the free surface of the suspension. The rheological model is found by calibration with experimental temperature measurements. Subsequently, the model is exploited to study the effect of applying heat both before and during mixing on the suspension’s mixing quality. Two mixing indexes are used to evaluate the mixing condition, namely, the Ica Manas-Zlaczower dispersive index and Kramer’s distributive index. Some fluctuations are observed in the predictions of the dispersive mixing index, which could be associated with the free surface of the suspension, thus indicating that this index might not be ideal for partially filled mixers. The Kramer index results are stable and indicate that the particles in the suspension can be well distributed. Interestingly, the results highlight that the speed at which the suspension becomes well distributed is almost independent of applying heat both before and during the process.
This paper examines the contact and constriction resistance phenomena in the context of 3D-printed electronics, with a focus on exploring the use of constriction resistance for force sensing. We design and manufacture a sensor using carbon-black conductive thermoplastic polyurethan (TPU) on a fused deposition modelling (FDM) 3D-printer, and test it using a geometry-based resistive model to fit the data to a number of possible force-resistance relations found in literature. The sensor exhibits low hysteresis between force and resistance, and good sensitivity at low forces, while at high forces it displays consistent contact and stable resistance. We analyse the design methodology and offer recommendations for future sensor design and fitting options, as well as put forward approaches to maximising force sensitivity. Although the exact model derived in this paper is not directly transferable to other sensors, the workflow can serve as a useful guide for future research.
The mixing of highly viscous non-Newtonian suspensions is a critical process in various industrial applications. This computational fluid dynamics (CFD) study presents an in-depth analysis of non-isothermal mixing performance in change can mixers. The aim of the study was to identify parameters that significantly influence both distributive and dispersive mixing in these mixers, which are essential for optimizing industrial mixing processes. The study employed a numerical design of experiments (DOE) approach to identify the parameters that most significantly influence both distributive and dispersive mixing, as measured by the Kramer mixing index () and the Ica Manas-Zloczower mixing index . The investigated parameters included mixing time, number of arms, arm size ratio, revolutions per minute (RPM), z-axis rotation, z-axis movement, and initial and mixing temperatures. The methodology involved employing the bootstrap forest algorithm for predicting the mixing indices, achieving an of 0.949 for and an of 0.836 for . The results indicate that the z-axis rotation has the greatest impact on both distributive and dispersive mixing. An increased number of arms negatively impacted , but had a small positive effect on . Surprisingly, in this study, neither the initial temperature of the material nor the mixing temperature significantly impacted the mixing performance. These findings highlight the relative importance of operational parameters over traditional temperature factors and provide a new perspective on mixing science.
17 July 2026 in Progress in Additive Manufacturing
Interlayer adhesion remains a primary limitation in material extrusion additive manufacturing (MEX-AM), where the bonding strength depends on the complex thermo-mechanical interactions arising during strand-on-strand deposition. This work presents a three-dimensional CFD framework of interlayer adhesion, together with dynamic strand-on-strand interface tracking and analysis of bottom-layer deformation. Validated across a wide range of process conditions the proposed model consistently outperforms existing semi-analytical approaches, particularly under low temperatures and high flow rates. A parametric study based on dimensionless kinematic (V/U), geometric (G/D), and thermal (T/T g ) ratios was conducted under natural and forced convection (HTC = 50–150 W m⁻ 2 K⁻ 1 ) and different layer cooling times (0.5–2.0 s). Increasing T/T g from 2.25 to 2.75 raised penetration length by 50% under short cooling times, while lowest values of G/D induced bottom-layer deformation up to 58%. Accordingly, a physically grounded metric is proposed to guide process parameter selection toward improved wetting conditions while limiting bottom-layer deformation, finding distinct optima at V/U = 1 and G/D = 0.50. High extrusion temperatures coupled with forced convection maximizes wetting while reducing deformation by an order of magnitude. The proposed framework provides practical manufacturing guidelines and advances physics-based digital twins for improving interlayer bonding conditions in MEX-AM components.