Carbon dioxide flooding is currently the most technically and economically viable enhanced oil recovery (EOR) process in carbonate and sandstone reservoirs. Low-salinity waterflood is a relatively new EOR process; and our experiments in carbonate cores show significant oil recovery improvements. We propose a new EOR process to improve economics, which involves low-salinity water-alternating-CO2 (LS-WAG) injection. To evaluate the proposed idea, three core floods and several contact angle and IFT measurements were performed. The core floods include: seawater flood, followed by low-salinity waterflood, followed by CO2 injection, which yielded fourteen, twenty-five, and thirty-eight percent additional oil recovery by CO2 from two carbonate and one sandstone experiments. We performed contact angle measurements on several low-permeability carbonate, medium-permeability Berea sandstone, and ultra-low permeability Three Forks mudstone core discs using different salinities. The contact angle measurements confirmed that favorable wettability alteration is achievable with the proposed EOR process. In addition, visual observations suggested that the proposed EOR process could be effective for cleaning the matrix-fracture interface in conventional and unconventional reservoirs. IFT measurments and modeling relevant to the EOR process is also included in this study. Low-salinity waterflood EOR Waterflooding is by far the most widely used method to increase oil recovery. Recent studies show that, by modifying the ionic content of water, wettability of reservoirs can be altered. When using seawater to alter wettability, there are different chemical mechanisms in effect between sandstone and carbonate formations. The polar components in the crude oil reacts with the positively charged carbonate rock surface differently from the negatively charged quartz/clay in sandstone formations, indicating different chemical bonding reaction mechanisms. In general, wettability alteration can be improved by modifying the ionic composition of the injected sea water (RezaeiDoust et al., 2009; Austad et al., 2010; Zekri et al., 2012; Al-Harrasi et al., 2012; Nasralla et al., 2013; Alameri et al., 2014a; Awolayo et al., 2014). Alameri et al. (2014a) through contact angle measurements and core flood experiments on carbonate cores showed improved oil recovery attributed to wettability alteration. Similar contact angle measurement and core flood experiments by Nasralla et al. (2011) showed oil-recovery improvement on sandstone cores. Study by Zekri et al. (2012) reported contact angle change with low-salinity brine, both on limestone and sandstone cores. Several brine injection concentrations were used in the experiment to examine the effect of salinity in oil recovery by varying sulfate concentrations. The study concluded that wettability alteration is the main mechanism to increase recovery by low-salinity water flooding. CO2 Flooding EOR Hydrocarbon and non-hydrocarbon gas injection in general, and CO2 floods in particular, is the leading EOR flooding process in light-oil and medium-oil, both in sandstone and carbonate reservoirs (Stalkup, 1978; Holm, 1987; Manrique et al., 2007; Ghedan 2009; Alvarado and Manrique 2010; OGJ 2014). Mostly from Permian basin, by the start of 2014, 300 M bbl/day of oil is produced by CO2-EOR in USA and is forecasted to grow to 638 M bbl/day by 2020 (Kuuskraa and Wallace 2014; OGJ 2014). Current utilization factor in mature USA CO2-EOR projects range from 5 to 15 Mcf of CO2 injected/bbl of oil produced (DOE/NETL 2014).