1 August 2014 in Materials Research
Austenitic-ferritic stainless steels containing 0.2% and 0.5% niobium were evaluated with respect to the microstructures, microhardness, pitting potential resistance, electrochemical impedance and wearing tests. Niobium is an alphagenic element and has a great influence on phase transformation of duplex stainless steels. In the present investigation, the samples were annealed at 1050 ºC and aged at 850 ºC to promote the formation of sigma phase. The pitting potential resistance and electrochemical impedance were evaluated in 3.5 % sodium chloride solution. The wear coefficients were calculated by micro-wear tests conducted using a fixed ball machine and aluminum oxide as abrasive. The results show that the niobium content lead to increase on Laves phase formation. This phase, in association with the sigma phase, causes a significant increase in the hardness and wear resistance with a decrease on corrosion resistance of the austenitic-ferritic stainless steels.
1 December 2013 in Rem: Revista Escola de Minas
LGLeonardo Cabral Gontijo
RSRosana Vilarim da Silva
The austenitic-ferritic stainless steels present a better combination of mechanical properties and stress corrosion resistance than the ferritic or austenitic ones. The microstructures of these steels depend on the chemical compositions and heat treatments. In these steels, solidification starts at about 1450ºC with the formation of ferrite, austenite at about 1300ºC and sigma phase in the range of 600 to 950ºC.The latter undertakes the corrosion resistance and the toughness of these steels. According to literature, niobium has a great influence in the transformation phase of austenitic-ferritic stainless steels. This study evaluated the effect of niobium in the microstructure, microhardness and charge transfer resistance of one austenitic-ferritic stainless steel. The samples were annealed at 1050ºC and aged at 850ºC to promote formation of the sigma phase. The corrosion testes were carried out in artificial saliva solution. The addition of 0.5% Nb in the steel led to the formation of the Laves phase.This phase, associated with the sigma phase, increases the hardness of the steel, although with a reduction in the values of the charge transfer resistance.
5 June 2017 in Materials Research
RSRosana Vilarim da Silva
POPedro Gabriel Bonella de Oliveira
Pedro Gabriel Bonella de Oliveira
JMJoão Batista Ribeiro Martins
João Batista Ribeiro Martins
The HSLA (High-Strength Low Alloy) steels are used in the production of pipes, flanges and connectors to build ducts for ore, oil and gas transport. The conventional processes are the rolling or forging. In the transport of ore and heavy oil, the abrasive particles impair the surfaces and reduce the pipelines lifetime. Therefore, besides the mechanical properties as API 5L, it is important to verify the wear resistance of these steels. In this context, two microalloyed steels were forged in the form of square bars. Thereafter, specimens of these bars were annealed at 930 ºC, quenched at 900 ºC and tempered at 600 ºC. Tensile and wear tests were performed. The results show that molybdenum and niobium present similar effects on phase transformation of steels, promoting a desired acicular ferrite/bainite microstructure and fulfill the mechanical strength of API 5L-X70 standard. The molybdenum has dominating effect in the hardenability when in solid solution, however, after tempering, thermodynamic simulation by FactSage software indicates that niobium probably promotes secondary hardening.
1 December 2015 in Matéria (Rio de Janeiro)
SSSuzana Souza Silva Scardua
Suzana Souza Silva Scardua
RSRosana Vilarim Da Silva
RESUMO Nos aços microligados da série API (American Petroleum Institute) utilizados na fabricação de dutos de grande diâmetro, a resistência mecânica deve ser suficiente para suportar as elevadas pressões do fluido transportado na indústria petroquímica. O aumento da resistência mecânica e da tenacidade para permitir a operação da linha em pressões mais elevadas, sem a ocorrência de colapso da estrutura, é o principal requisito para os aços utilizados nestes dutos. No Brasil, as empresas produzem estes aços por meio da laminação de tiras a quente ou chapas grossas, com adição de nióbio, titânio e vanádio, conforme os requisitos da norma API 5L. Considerando a complexidade geométrica dos componentes utilizados na indústria petroquímica, tais como flanges e centralizadores de tubos, é importante desenvolver um processo alternativo para fabricação de acessórios com as exigências desta norma. Dentro deste contexto e com o objetivo de avaliar novas técnicas de processamento, foi elaborado um aço com composição química similar à de um API 5L X70. O metal líquido foi vazado em uma lingoteira e forjado em barras com secção quadrada. As barras foram recozidas e amostras foram cortadas para confecção de corpos de prova que foram submetidos à têmpera e revenimento em diferentes temperaturas. As análises microestruturais e propriedades mecânicas de dureza e tração, após os tratamentos térmicos, foram comparadas às existentes na literatura para tubos de aços laminados. Os resultados mostram que as condições dos tratamentos térmicos são importantes para desenvolver uma rota alternativa de forjamento controlado, para aços com características da norma API 5L.