Austenitic-ferritic stainless steels containing 0.2% and 0.5% niobium were evaluated with respect to the microstructures, microhardness, pitting potential resistance, electrochemical impedance and wearing tests. Niobium is an alphagenic element and has a great influence on phase transformation of duplex stainless steels. In the present investigation, the samples were annealed at 1050 ºC and aged at 850 ºC to promote the formation of sigma phase. The pitting potential resistance and electrochemical impedance were evaluated in 3.5 % sodium chloride solution. The wear coefficients were calculated by micro-wear tests conducted using a fixed ball machine and aluminum oxide as abrasive. The results show that the niobium content lead to increase on Laves phase formation. This phase, in association with the sigma phase, causes a significant increase in the hardness and wear resistance with a decrease on corrosion resistance of the austenitic-ferritic stainless steels.
The austenitic-ferritic stainless steels present a better combination of mechanical properties and stress corrosion resistance than the ferritic or austenitic ones. The microstructures of these steels depend on the chemical compositions and heat treatments. In these steels, solidification starts at about 1450ºC with the formation of ferrite, austenite at about 1300ºC and sigma phase in the range of 600 to 950ºC.The latter undertakes the corrosion resistance and the toughness of these steels. According to literature, niobium has a great influence in the transformation phase of austenitic-ferritic stainless steels. This study evaluated the effect of niobium in the microstructure, microhardness and charge transfer resistance of one austenitic-ferritic stainless steel. The samples were annealed at 1050ºC and aged at 850ºC to promote formation of the sigma phase. The corrosion testes were carried out in artificial saliva solution. The addition of 0.5% Nb in the steel led to the formation of the Laves phase.This phase, associated with the sigma phase, increases the hardness of the steel, although with a reduction in the values of the charge transfer resistance.