A novel dual-polarized band-absorptive frequency selective rasorber (FSR) is proposed in this paper. The FSR is constructed by twolayer cascaded printed circuit boards, in which meander-line square loops with and without lumped resistors loaded on the top and bottom surfaces of the two substrates. Its operating principle is analyzed and an accurate equivalent circuit model is presented. A prototype has been fabricated, assembled and measured. The measured absorption band is from 4.8GHz to 6.81GHz (34.6%), with a thickness of λa/8 at 4.8GHz. Moreover, it is almost transparent to electromagnetic waves below 1.54 GHz. The measurement results achieve a good agreement with the simulated results, which verifies the effectiveness of the design.
17 August 2018 in IEEE Transactions on Microwave Theory and Techniques
In this paper, we present a new behavioral model for digital predistortion (DPD) of RF power amplifiers in wireless transmitters. Derived from the decomposed vector rotation model, the new model uses magnitude-selective affine functions as nonlinear operators to construct nonlinear behavior of the model, leading to a highly efficient hardware implementation. Moreover, cross-terms are carefully redesigned based on a new formulation of model structure that not only improves the modeling performance but also significantly lowers the complexity of model extraction. Simulation and experimental results have demonstrated its superior performance and efficient hardware implementation, making this model well suitable for future DPD deployment in 5G small cell base stations where digital hardware resource is highly constrained.
23 January 2017 in IEEE Transactions on Microwave Theory and Techniques
This paper proposes a novel hardware implementation strategy to achieve low-cost design for digital predistortion of radio frequency power amplifiers (PAs) using a modified decomposed vector rotation-based behavioral model. To make the model hardware friendly, we first modify the model into a subdecomposed format, which significantly reduces the computational complexity in model extraction. We then reassemble the coefficients and propose a simple digital implementation structure for real-time signal processing in the transmit path. A new dual-direction coordinate rotation digital computer design is also proposed to simultaneously calculate both magnitude and e jθ n values to facilitate the model implementation. To validate hardware implementation, a wideband signal is employed to evaluate the performance with a Doherty PA. Experimental results show that the proposed approach can achieve comparable performance with much lower system complexity compared with that using the conventional approaches.
2 November 2021 in IEEE Transactions on Microwave Theory and Techniques
A novel behavioral modeling technique for digital predistortion of radio frequency power amplifiers (PAs) is proposed. The proposed basis-propagating selection (BAPS) model has an advantage on complexity since its basis functions are constructed as delay or a combination of existing basis functions. The BAPS model effectively optimizes the running time complexity while maintaining the generality of a full Volterra series. A greedy search procedure is applied to select the optimal basis functions. Compared with truncated Volterra models and pruned models obtained by popular pruning techniques, the superior performance of the BAPS model, in terms of accuracy and identification stability, has been fairly justified. The linearization measurements on different types of PAs illustrate that the BAPS model can robustly outperform other models from literature while achieving a low running complexity.
21 October 2021 in IEEE Transactions on Microwave Theory and Techniques
In this article, we propose a novel technique of digital predistortion (DPD) for dual-band power amplifiers (PAs) based on the periodically nonuniform sampling (PNS) theory. In contrast to conventional dual-band DPD (2-D-DPD) models, the proposed periodically nonuniform sampled DPD (PNS-DPD) has only a single input, which can largely reduce the model complexity. We fold the two stimuli with aliasing and feed them to a simple single-band DPD model. The desired predistorted signals are reconstructed from aliased DPD output through the PNS theory. Compared with conventional multi-input models that include numerous intermodulation products of the input signals, the complexity of the proposed single-input PNS-DPD model is hugely decreased. The model coefficients of the proposed PNS-DPD can be easily extracted with conventional direct or indirect learning architecture. We experimentally evaluate the proposed DPD on a test bench and compare it with other DPD techniques in the literature. The implementation complexity can be reduced by over 30%, and the identification complexity is also largely reduced.
7 December 2017 in IEEE Transactions on Microwave Theory and Techniques
The transmitter (TX)-induced interference due to power amplifier nonlinearities poses severe desensitization problems to the receiver chain in frequency-division duplexing transceivers. Due to nonlinear signal process involved, a high sampling rate is normally required in the existing digital suppression approaches, which can result in high cost and high power consumption in wideband systems. In this paper, a new digital suppression model is proposed to cancel the TX leakage at baseband with a low sampling rate. The cancellation model is based on the modified decomposed vector rotation model. With the addition of cross-term products, the enhanced model is capable of eliminating the aliasing effect arising from the reduced sampling rate. Theoretical analysis of aliasing elimination is presented, and the algorithm is subsequently verified by both simulation and experiment results, confirming the effectiveness and feasibility of the proposed cancellation technique for TX leakage suppression. Compared with conventional solutions, the new approach uses much less hardware resource and consumes much lower power while achieving comparable performance.