Yufeng Yu

Dr. Yufeng Yu


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 November 2018 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
WYWeiliang Yu
Weiliang Yu
Guoqing LuoGuoqing Luo
Guoqing Luo
YYYufeng Yu
Yufeng Yu
YPYujian Pan
Yujian Pan
WCWenhui Cao
Wenhui Cao
ZSZhongxiang Shen
Zhongxiang Shen
A novel dual-polarized band-absorptive frequency selective rasorber (FSR) is proposed in this paper. The FSR is constructed by twolayer cascaded printed circuit boards, in which meander-line square loops with and without lumped resistors loaded on the top and bottom surfaces of the two substrates. Its operating principle is analyzed and an accurate equivalent circuit model is presented. A prototype has been fabricated, assembled and measured. The measured absorption band is from 4.8GHz to 6.81GHz (34.6%), with a thickness of λa/8 at 4.8GHz. Moreover, it is almost transparent to electromagnetic waves below 1.54 GHz. The measurement results achieve a good agreement with the simulated results, which verifies the effectiveness of the design.

7 June 2017 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
YYYufeng Yu
Yufeng Yu
ZSZhongxiang Shen
Zhongxiang Shen
TDTianwei Deng
Tianwei Deng
GLGuoqing Luo
Guoqing Luo
This communication presents a 3-D frequency-selective rasorber (FSR) that has a passband with a low insertion loss and two absorption bands at both sides of the passband. A lossless and two lossy resonators are employed in the unit cell of the periodic structure to produce the passband and the absorption bands, respectively. Utilizing the techniques of stepped impedance resonator and capacitor loading, the thickness of the resonators is reduced. Moreover, the capacitor loading also frees the tuning of each resonant frequency of the lossy resonator, which facilitates the FSR design. The multiresonances of the lossy resonators are also employed to obtain a wide upper absorption band. An equivalent circuit model is established for understanding the operating principle. A prototype of the proposed FSR is fabricated and measured. Good agreement between measured and simulated results validates our FSR design.

17 December 2018 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
TDTianwei Deng
Tianwei Deng
YYYufeng Yu
Yufeng Yu
ZSZhongxiang Shen
Zhongxiang Shen
ZCZhi Ning Chen
Zhi Ning Chen
A multilayer structure and magnetic ferrite material are employed to expand the absorption bandwidth of 3-D frequency-selective rasorber (FSR). Resonant-like ferrite is used to realize the magnetic loss with high selectivity of absorption over a wide frequency band, while the multilayer structure is proposed to achieve multiple absorption peaks at designated frequencies. Combining the loaded ferrite material with multilayer structure can realize wide absorption bands. Equivalent circuit models are utilized to understand the operating mechanism of the described 3-D structure and to guide the design of multilayer structure with selected ferrite materials. Two broadband 3-D FSRs are designed, fabricated, and measured. Both designs achieve the sextuple bandwidth ratio with reflectivity less than -10 dB, and the absorption band with a bandwidth ratio of >2.6:1 can be achieved at either lower or upper absorption band, respectively.

31 July 2020 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
Guoqing LuoGuoqing Luo
Guoqing Luo
WYWeiliang Yu
Weiliang Yu
YYYufeng Yu
Yufeng Yu
XZXiao Hong Zhang
Xiao Hong Zhang
ZSZhongxiang Shen
Zhongxiang Shen
A three-dimensional (3-D) structure is proposed in this article for ultra-wideband absorber design. The ultra-wideband absorber is implemented by properly combining two subabsorbers. The first subabsorber operates in its fundamental mode (f₀) and the third-order mode (3f₀). Its lossy layer is designed with an infinite impedance at the second-order mode frequency (2f₀). The second subabsorber is designed to operate in its fundamental mode frequency, which is corresponding to 2f₀ of the first subabsorber. A double-sided parallel-strip line (DSPSL) is employed to produce the required infinite impedance of the first absorber. A simple equivalent circuit model of the DSPSL is established to explain the operating principle. A conventional parallel LC circuit is also provided for comparison to show the advantages of the DSPSL. Single-polarized and dual-polarized ultra-wideband absorbers are designed by combining these two subabsorbers, and their simulated fractional bandwidths (FBWs) of 151.6% and 150.9% are achieved, respectively. A prototype of the dual-polarized ultra-wideband absorber is fabricated and measured to validate the design concept. Its measured absorption band from 1.50 to 12.31 GHz with an FBW of 156.6% is in a good agreement with the simulated one. The proposed absorber features a wide absorption band and few lumped elements, which makes it more useful in practical applications.

2 June 2021 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
WYWeiliang Yu
Weiliang Yu
YYYufeng Yu
Yufeng Yu
WWWenlei Wang
Wenlei Wang
XZXiao Hong Zhang
Xiao Hong Zhang
Guoqing LuoGuoqing Luo
Guoqing Luo
A gain-enhanced antenna consisting of a bandpass frequency selective surface (FSS) and a patch antenna is initially proposed in this communication. By utilizing the reflection characteristic of the FSS, a quasi-Fabry–Perot (F-P) cavity is formed between the FSS and antenna’s ground, which considerably improves the gain of the antenna. Meanwhile, the bandpass FSS has a little phase compensation for oblique transmitting waves, which also slightly enhances the gain. Then a low-radar cross section (RCS) and gain-enhanced antenna is proposed by using absorptive/transmissive frequency selective structure (ATFSS). It is implemented by mounting the ATFSS above a patch antenna. The ATFSS is constructed by stacking a lossy layer above a bandpass FSS. Both antennas are fabricated, assembled, and measured. They achieve a gain-enhancement of 5.27 and 3.84 dB, respectively. Besides, the low-RCS antenna achieves 10 dB monostatic RCS reduction from 5 to 5.33 GHz and from 9 to 13.4 GHz under the TE-polarization, and from 8.4 to 13.5 GHz under the TM-polarization, respectively. Simulated results show it also achieves a good improvement in bistatic RCS reduction as well.

15 June 2020 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
Guoqing LuoGuoqing Luo
Guoqing Luo
WYWeiliang Yu
Weiliang Yu
YYYufeng Yu
Yufeng Yu
HJHuayan Jin
Huayan Jin
Kuikui FanKuikui Fan
Kuikui Fan
FZFang Zhu
Fang Zhu
A dual-polarized broad band-absorptive frequency selective rasorber (FSR) is proposed in this paper. The FSR has a lowpass band with low insertion loss and a broad absorption band. It is a two-layer structure formed by a lossy surface cascaded an absorptive transmission/reflection surface (ATRS), in which the ATRS is constructed by one substrate with a resistive square loop on its top side and a double square loop on its bottom side. The working mechanisms of the proposed ATRS and FSR are completely studied by using their equivalent circuit models. The ATRS retains dual stopbands of the double square loop, and suppresses the unwanted transmission pole of the double square loop. Then a broadband absorptive FSR is achieved. A sample of the proposed FSR is fabricated and measured. The measured results show that the proposed FSR has a lowpass band up to 860 MHz (|S21|≥–1 dB) and a broad absorption band with bandwidth of 95.3% from 3.84 GHz to 10.83 GHz (|S11|≤–10 dB and |S21|≤–10 dB).