11 July 2023 in IEEE Transactions on Power Electronics
This article proposes a high-efficiency isolated dc-dc-ac three-port converter (TPC) intended for residential photovoltaic-battery systems. The TPC is derived from a DAB-based dc-ac converter. Its dc-side provides two bidirectional dc ports by sharing the full-bridge topology, while its ac-side enables direct ac-load connection via a unique T-type half-bridge structure. Due to the shared branches and T-type topology, the proposed TPC has few components but offers single-stage power conversion and substantial control degrees of freedom (CDF). Sufficient CDFs facilitate the TPC to maintain high efficiency when performing decoupled power flow control among the three ports. To maximize the benefits of sufficient CDFs, a pulsewidth modulation (PWM) plus triple-phase-shift (TPS) modulation scheme based on these CDFs is presented. PWM is employed to control the dc-dc power flow while TPS is used to regulate the dc-ac power flow. Benefiting from the TPS optimization, this TPC features low rms current and excellent soft-switching performance. Compared to state-of-the-art, the efficiency of the proposed TPC is improved by up to 1% under the proposed modulation scheme. The effectiveness of the proposed TPC is verified by a 220-V 500-W experimental setup.
25 September 2020 in Phytotherapy Research
9 July 2024 in IEEE Transactions on Power Electronics
The inefficiency of solid-state transformers (SSTs) under medium (or light) loads poses a significant challenge for wide power range applications, which leads to reduced energy utilization, increased electricity costs, and potential reliability issues. To solve this problem, this article proposes an SST efficiency improvement strategy considering full power range. The SST utilizes a full-bridge modular multilevel converter (MMC) as the front-end and an input-series-output-parallel dc–dc stage as the back-end. By dynamically adjusting the number of back-end dc–dc cells according to the load power, this strategy significantly reduces the fixed loss of SST at medium and light loads. Meanwhile, a variable intermediate dc bus voltage control is introduced by the front-end MMC. It guarantees the smooth adjustment without inrush current and high system efficiency at heavy loads. Based on the loss model of MMC-SST, a 10 kV/1 MW case validates that the proposed strategy can improve the SST efficiency by 3.3% at light loads while rarely impacting the efficiency at rated loads. Simulations and experiments confirmed the feasibility.
16 July 2024 in IEEE Transactions on Power Electronics
Current-fed isolated bidirectional dc–dc converters (CFIBDCs) are suitable solutions for feeding batteries. However, maintaining high efficiency over wide input and output voltage (IOV) range remains a challenge for them. This article proposes a hybrid CFIBDC intended for wide IOV range operation, which is constructed by integrating a current-fed dual-active-bridge and an LC -resonant converter (LCRC). It has two power channels, i.e., a DAB-based channel and an LCRC-based channel. The DAB-based channel can achieve zero-voltage-switching (ZVS) regardless of the IOV condition. And the LCRC-based channel, which features zero-current-switching (ZCS), can share the power for the DAB-based channel, thus reducing conduction losses. By properly allocating the power between two channels, low conduction losses, full-voltage-range ZVS or ZCS, as well as low turn- off losses can be simultaneously attained over wide IOV range, thus maintaining high efficiency for the proposed converter. Meanwhile, the total device capacity is not increased compared to the state of the art. Moreover, since LCRC provides a unity voltage gain, the proposed converter is naturally voltage-matched, leading to a simplified control scheme. The effectiveness of the converter is verified by a 1.5 kW experimental setup.
6 January 2025 in IEEE Transactions on Power Electronics
Three-phase LLC converters show considerable potential in battery chargers. However, the existing parameter design methods for three-phase LLC converters have limitation in analytical accuracy and efficiency optimization over the wide voltage range. To address the above issues, this article proposes a time-domain model (TDM) based design method for three-phase LLC chargers. First, a comprehensive TDM for the three-phase LLC converter is developed, providing a detailed analysis of operating modes and mode distributions across the entire operating range. Then, based on TDM, a novel design method is proposed to optimize the efficiency of the entire charging process. The resonant root-mean-square current is selected as the optimization objective, and its relationship with design parameters is researched to derive the optimal constraints. Meanwhile, suitable operating modes are identified for each charging pattern to satisfy the soft-switching condition. A step-by-step design procedure is finally provided to determine the optimal parameters. The analysis proves that the proposed design methodology enhances accuracy and efficiency across the entire operating range of the three-phase LLC charger. The effectiveness is also validated through a 4.5-kW experimental setup with 98.1% peak efficiency.
16 December 2016 in PLOS ONE
Increased lymph node count (LNC) has been associated with prolonged survival in colorectal cancer (CRC), but the underlying mechanisms are still poorly understood. The study aims to identify new predictors and develop a preoperative nomogram for predicting the probability of adequate LNC (≥ 12). 501 eligible patients were retrospectively selected to identify clinical-pathological factors associated with LNC ≥ 12 through univariate and multivariate logistic regression analyses. The nomogram was built according to multivariate analyses of preoperative factors. Model performance was assessed with concordance index (c-index) and area under the receiver operating characteristic curve (AUC), followed by internal validation and calibration using 1000-resample bootstrapping. Clinical validity of the nomogram and LNC impact on stage migration were also evaluated. Multivariate analyses showed patient age, CA19-9, circulating lymphocytes, neutrophils, platelets, tumor diameter, histology and deposit significantly correlated with LNC (P < 0.05). The effects were marginal for CEA, anemia and CRC location (0.05 < P < 0.1). The multivariate analyses of preoperative factors suggested decreased age, CEA, CA19-9, neutrophils, proximal location, and increased platelets and diameter were significantly associated with increased probability of LNC ≥ 12 (P < 0.05). The nomogram achieved c-indexes of 0.75 and 0.73 before and after correction for overfitting. The AUC was 0.75 (95% CI, 0.70–0.79) and the clinically valid threshold probabilities were between 10% and 60% for the nomogram to predict LNC < 12. Additionally, increased probability of adequate LNC before surgery was associated with increased LNC and negative lymph nodes rather than increased positive lymph nodes, lymph node ratio, pN stages or AJCC stages. Collectively, the results indicate the LNC is multifactorial and irrelevant to stage migration. The significant correlations with preoperative circulating markers may provide new explanations for LNC-related survival advantage which is reflected by the implication of regional and systemic antitumor immune responses.