Using aberration-corrected electron microscopy and spectroscopy, we reveal the atomic scale structure and catalytic function of the A-site-deficient perovskite La0.7Fe0.7Mn0.3O3, uncovering a heterogeneous defect landscape that governs its activity in reducing NO by CO. We identified a layer of La0.7-xFe0.7Mn0.3O3 that is highly A-site-deficient. This layer is just two to three unit cells thick at the surfaces and the interfaces of the perovskite particles and transitions toward the bulk into stoichiometric LaFe0.7Mn0.3O3. These confined defect layers stabilize catalytically active sites, enabling the formation of FeOx inclusions ranging from approximately 1 nm to several nanometers in size at the surfaces. In situ surface characterization and catalytic measurements reveal that these interfacial FeOx nanoparticles serve as active sites during the NO reduction by CO via the Mars-van Krevelen mechanism. Our findings establish a direct relationship between the structure and properties of nanoscale A-site nonstoichiometry and redox-driven catalytic activity. This relationship offers a new design strategy for tailoring reactivity through defect engineering.
11 December 2025 in Microporous and Mesoporous Materials
In this study, conductive, fluorine and antimony co-doped tin oxide nanoparticles (FATO-NPs) are highlighted as a possible alternative for conductive carbon additives in fluoride ion batteries, successfully circumventing oxidative side reactions. Since good cyclability with high and stable discharge capacities was achieved with both types of conductive additive, it was concluded that conductive carbon is well suitable for high-voltage fluoride ion batteries, contrary to prior assumptions. The utilization of almost completely side-reaction free FATO-NPs as the conductive additive enables the deconvolution of other side reactions in initial cycles.