In this study, we report the synthesis of copolymers incorporating an ether-sidechain containing (EM) and a sterically hindered hydrophobic, anthracene-derived norbornene monomer (AM). Using this copolymer system, we developed both block and statistical copolymers, with the latter demonstrating excellent potential for the fabrication of robust anion exchange membranes (AEMs) when blended with poly(oxindolebiphenylene) (POB). Stable membranes with controllable swelling and water uptake properties were obtained. The composition of the blend was systematically varied to evaluate the effects of different POB ratios on membrane conductivity, stability, and performance in anion exchange membrane water electrolysis (AEMWE). The blend membrane comprising 10 wt% POB and 90 wt% of the statistical copolymer EM0.54-q-co-AM0.46-h demonstrated excellent AEMWE performance, delivering a current density of 2.0 A cm−2 at 1.91 V without the use of platinum group metal (PGM) catalysts, and under a dry cathode configuration.
Renewable energy is essential for the transition to a carbon‐neutral society. Due to their intermittent nature, temporary storage is required. The all‐vanadium redox flow battery (VRFB) is a promising technology for this purpose. Commercially available membranes, such as the FAPQ330 from Fumatech BWT, already show reasonable performance but still have room for improvement in selectivity and conductivity. In this study, we developed new ductile porous blend membranes based on the polybenzimidazole F6PBI by mixing it with poly(diallyldimethylammonium bis(trifluoromethane)sulfonimide), which was prepared from the commercially available poly(dimethylammonium chloride) (PDADMAC). Three types of membranes with different amounts of PDADMA*TFSI in the blend solution were prepared and characterized. Ex‐situ conductivity measurements showed conductivities between 8.3 and 30.5 mS cm−1. Ex‐situ permeability tests revealed significantly lower permeabilities compared to the reference membrane FAPQ330. No change in ex‐situ conductivity was measured after the ex‐situ stability test. F6PBI‐PDAD37 reached the highest energy efficiency at 50, 100, and 200 mA cm−2 among all tested membranes. For example, a VRFB single‐cell equipped with F6PBI‐PDAD37 showed an improved EE of 76.5% at 200 mA cm−2, which is higher than the EE of FAPQ330 (74.3%).