The economy of electrified vehicles can be improved by using the motor to recover the energy released during braking. However, the vehicle’s regenerative braking system (RBS) and anti-lock braking system (ABS) are not compatible, so the energy dissipated during braking cannot be recovered under emergency braking conditions. This paper employs the method of logic threshold control combined with phase plane theory to analyze the relationship between the slip rate and the braking torque during the ABS braking process and to obtain the composition rule of the braking torque required for ABS braking. Based on this rule, a control strategy to coordinate RBS and ABS when triggering ABS is proposed to improve the efficiency of braking energy recovery. Furthermore, a comparative simulation is conducted to analyze the braking performance of electrified vehicle on roads with different adhesion coefficients by adopting the proposed control strategy and the traditional control strategy. The results show that, compared with the traditional coordinated control strategy, the braking energy recovery efficiency of the proposed coordinated control strategy is improved by 23.08%-38.54%, and can effectively shorten the braking distance and braking time, with better braking performance. Therefore, this paper offers a useful theoretical reference to the design of RBS and ABS coordinated control strategies for electrified vehicles.
1 February 2007 in APEC 07 - Twenty-Second Annual IEEE Applied Power Electronics Conference and Exposition
This paper presents the design guideline on how to design a transformer isolated high power dc-dc converter. There are several design issues and challenges. In this paper, we focus on three major issues in high power dc-dc converters: 1) A passive snubber circuit and selection of PWM control methods are first introduced to reduce the voltage spike and power loss across switching devices; 2) Interleaved winding method is then employed to reduce proximity effect in the transformer; and 3) the voltage oscillation problem in the secondary diode rectifier is addressed and overcome.