12 May 2026 in CIRP Annals
11 May 2026 in Computers & Structures
NCNikolaos A. Chrysochoidis
Nikolaos A. Chrysochoidis
1 April 2026 in Smart Materials and Structures
In this work, a new numerical model is presented, addressing the challenge of accurately modeling high-frequency transient responses in composite beams with piezoelectric sensors and actuators. Simulations like these are a key aspect of the effective design of wave-based structural health monitoring and impact detection systems. Specifically, Daubechies scaling functions are utilized as basis functions for the spatial approximation of both mechanical and electric variables, extended by the integration of piezoelectric kinematic assumptions, enabling the consistent prediction of electromechanical coupling and the exact modeling of structures with physically modeled actuators and sensors. The beam’s mechanical behavior is described using first-order shear deformation theory, while the electric potential through the thickness is captured via a linear layerwise approximation. The developed model is validated and compared with finite element models under static and dynamic simulations. Interestingly, the presented method exhibits remarkably high convergence rates and requires substantially fewer grid points for convergence compared to finite element models. The findings demonstrate the potential of the proposed wavelet-based approach to enable the development of efficient and accurate models for high-frequency wave propagation simulations, which can enhance the transient dynamic analysis of smart electromechanical systems.
1 August 2026 in e-Journal of Nondestructive Testing
VSVasileios Stratiotou-Efstratiadis
Vasileios Stratiotou-Efstratiadis
+3
The current work presents the manufacturing, poling, testing and validation of a fully 4D printed strip with two integrated piezopolymer (PVDF) elements with printed electrodes. The configuration is designed based on the pitch and catch concept, where each PVDF can perform either as actuator or sensor for wave-based structural health monitoring (SHM) applications. The whole system is additively manufactured using a multi-material printer and three different materials: ABS (acrylonitrile butadiene styrene) for the host beam, PVDF for the piezoelectric elements and silver conductive ink or conductive epoxy for the electrodes. After the fabrication, contact poling is performed in order to increase the PVDFs piezoelectric properties. In contact poling, a high electric field is applied through-the-thickness on each piezopolymer for a specific time period. The poling efficiency is evaluated through vibration testing, where the piezoelectric constants of each PVDF are approximated using inverse numerical modeling. After successful poling, impact tests and guided wave propagation experiments manifest the capacity of the printed PVDF elements to be used as sensors and actuators. The experimental results manifest the great potential of such 4D printed structural systems in SHM applications.