6 January 2022 in International Journal of Microwave and Wireless Technologies
The μ-negative metamaterial (MNG) two-element MIMO antenna design was proposed in this article for WiMAX (2.5–2.8 GHz), WLAN (3.2–5.9 GHz), and ITU band (8.15−8.25 GHz) applications. The first design of the MIMO antenna operates at 2.7 and 4.9 GHz frequencies. In order to reduce the mutual coupling, a defective ground structure is used. For further isolation improvement, an MNG unit cell is placed in between the two radiating elements at a distance of 10 mm. The designed antenna elements have better than −23 dB coupling isolation between the two radiating elements. Moreover, with MNG an additional frequency of 8.2 GHz is obtained, which is useful for ITU band applications. The proposed antenna bandwidth is expanded by 19% in the lower operational band, 20% in the second operational band, and 32% in the higher frequency band with the MNG unit cell. From the analysis, the proposed antenna is suitable for WiMAX/WLAN/ITU band applications because of its low enveloped correlation coefficient, and highest directive gain and low mutual coupling between the radiating components. The proposed antenna was simulated, fabricated, and measured with the help of the Schwarz ZVL vector network analyzer and anechoic chamber. Both measured and simulated results are highly accurate and highly recommended for WiMAX/WLAN/ITU bands.
12 February 2024 in Analog Integrated Circuits and Signal Processing
3 January 2020 in International Journal of RF and Microwave Computer-Aided Engineering
14 June 2022 in Analog Integrated Circuits and Signal Processing
1 January 2019 in Telecommunications and Radio Engineering
GVG. K. D. Prasanna Venkatesan
G. K. D. Prasanna Venkatesan
This research paper isolation enhancement techniques using T-strip defected ground structure (DGS) UWB MIMO antenna is reported. Two identical monopole structures have been designed with DGS structure resonate at 3.9, 7.3, and 9.9 GHz frequencies which is cover 3.1-10.6 GHz UWB band. The projected DGS is partially cut the ground plane to progress isolation >-15 dB and minimize mutual coupling the DGS structure has been introduced with help of T shape strip below the two monopole patches and FR4 substrate height is 1.6 mm. To evaluate the proposed antenna the DGS equivalent circuit has been simulated with help of circuit simulator. The MIMO diversity performance is estimated through the envelope correlation coefficient (ECC) and diversity gain (DG) the value is 9.95 dB. A fabricated model is measured and a parametric study analyzed to achieve the required UWB band. The overall antenna size is 18×14 mm which is very compact size compared to the existing antenna also this structure proves that practically suitable.