Iron-dominated superconducting magnets are one of the most popular and most used design choices for superconducting magnetic quadrupoles for accelerator systems. While the iron yoke and pole tips are economic and effective in shaping the field, the large amount of iron also leads to certain drawbacks, namely, unwanted harmonics from the sextupole correctors nested inside of quadrupole iron pole tips. Additional problems include the cryogenic design challenges of the iron yoke being part of the cold mass, and the mechanical challenges of mounting the sextupole and octupole. The Facility for Rare Isotope Beams (FRIB) plans to implement a coil-dominated cosine-theta type quadrupole as a future upgrade, and the advantages of using an iron-free quadrupole, along with the methods and choices of the design and the approach for the planned fabrication, as well as current status of the project are overviewed in this paper.
10 February 2023 in IEEE Transactions on Applied Superconductivity
In 2022, the Facility for Rare Isotope Beams (FRIB) has been established as one of the world-class user facilities for the study of physics of atomic nuclei. The key feature is to provide a variety of nuclei with an energy of 200 MeV per nucleon with a beam power up to 400 kW in the FRIB driver linear accelerator (linac). The linac driven beam experiences a series of the FRIB fragment separator, consisting of the hot-cell target hall, vertical pre-separator, and A1900 fragment separator, which eventually allows a successful delivery of the final rare isotope of interest into the experimental vaults. The superconducting magnet commissioning with heavy ion beams has been progressed by the completion of each area sequentially, and finally the first rare isotope of selenium-84 was successfully produced with the FRIB target using a krypton-86 primary beam, demonstrating FRIB's capability for scientific discovery. This paper presents the FRIB superconducting magnet scope, series fabrication and installation, and the energization at the FRIB premises. The discussion deals with the major test results, and also suggests the significance of advanced technology development for the FRIB next-generation superconducting magnet.
13 February 2025 in IEEE Transactions on Applied Superconductivity
The High Rigidity Spectrometer (HRS) project is a critical expansion of the Facility for Rare Isotope Beams (FRIB), designed to transport high-emittance rare isotope beams with magnetic rigidities of up to 8 Tesla-meters. The HRS consists of two main segments: the upstream High Transmission Beamline (HTBL) and the downstream Spectrometer Section (SPS). This paper presents the design feature of the HTBL's superconducting magnets, which include eight quadrupole triplets and four dipoles. Two different approaches for the quadrupole magnets are explored: the iron-dominated and coil-dominated designs, each with distinct electromagnetic characteristics and manufacturing techniques incorporating nested higher-order multipoles. The dipole design builds upon the proven technology of FRIB's existing switching dipoles, benchmarked from the National Superconducting Cyclotron Laboratory (NSCL) era. Here, we discuss the advantages and limitations of the proposed design options and their performance to meet HTBL operational requirements. Insights gained through FRIB's design advancements and challenges encountered in developing high-performance superconducting magnets for the HRS project are also presented.
11 February 2025 in IEEE Transactions on Applied Superconductivity
The Facility for Rare Isotopes Beams (FRIB) delivers heavy-ion primary beams at energies of up to 300 MeV/u at 10 kW of beam power to generate rare isotope beams for experiments and will eventually operate at beam power of 400 kW. The preseprator of the Advanced Rare Isotope Separator (ARIS) is equipped with six warm-iron quadrupole (WIQ) singlets and two dipoles integrated right after the production target. They have a compact structure and operate in a high radiation vacuum environment within a hot cell having remote handling capabilities for installation and maintenance. Due to asymmetry with respect to the quadrupole poles, nested sextupole excitations in WIQs induce vertical dipoles that offset the centroid trajectory; Magnet misalignments also result in trajectory offsets. Such offsets degrade separator performance but can be minimized by changing the current distribution on sextupole and octupole coils. In this work, we show how modifications to the WIQ coil design can allow superimposed dipole fields to be included to the octupole and sextupole windings, as well as addition of dipole components by splitting coil currents over groups with separator power supplies. Adjusting the group currents can cancel the sextupole-induced vertical dipole component which can be as high as 0.012 Tm. Octupole coil changes may superimpose a horizontal dipole integrated strength as high as 0.0332 Tm. Unwanted higher harmonics induced as a side effect of the new design are kept to a minimum such that separator performance is preserved as much as possible.
22 February 2023 in IEEE Transactions on Applied Superconductivity
An SRF photo-injector (low frequency, quarter-wave resonator plus emittance compensation magnet) is planned for LCLS-II-HE as it can provide a higher cathode gradient and better electron beam quality than other types of CW electron guns. The magnet package is located immediately downstream of the SRF cavity, and incorporates a solenoid doublet, bucking coils for reduction of the fringe field, normal/skew quadrupoles and horizontal/vertical dipoles. All the magnets are wound of NbTi wire and operate in liquid helium environment. The solenoid package is located inside the SRF gun cryomodule. Design considerations include space limitations, optimal emittance compensation, the magnetic field limits in the superconducting wire and quench protection. The solenoid coils must provide a peak excitation > 25 kgauss 2 ·cm, a fringe field < 20 gauss at the wall of the SRF cavity, an integrated dipole field < 90 gauss·cm and an integrated quadrupole field < 10 gauss. A genetic algorithm was used to optimize the solenoid design. Correction dipoles and quadrupoles were designed using coil dominated Walstrom style coils.
24 November 2025 in IEEE Transactions on Applied Superconductivity
A large-scale, rectangular, iron-dominated superconducting dipole magnet, DS1, has been designed for the High Rigidity Spectrometer (HRS) at Facility for Rare Isotope Beams (FRIB), Michigan State University (MSU). As part of the 8 Tm spectrometer system, DS1 is designed to produce a 2.32 T mid-plane field at an operating current of 406 A. It is energized by six superconducting coil sub-divisions wound with large wire-in-channel (WIC) NbTi conductor and cooled with liquid helium. A room-temperature iron yoke shapes the dipole field, with ferromagnetic field clamps added to reduce fringe fields near detectors and sensitive electronics. A novel quench protection circuit incorporating cold diodes has been developed to prevent unbalanced forces on support links during asymmetric quench events and to limit current through the high-temperature superconductor (HTS) leads. The coil helium vessel has been optimized to withstand large Lorentz forces, with stress and displacement analyses confirming mechanical integrity at cryogenic temperatures. The thermal shield, constructed from alternating copper and stainless steel panels, has been designed to maintain mechanical integrity and suppress eddy currents during quench events.