AlGaN/gallium nitride (GaN) ion-sensitive field-effect transistors (ISFETs) were fabricated as pH sensors. The sensitivity of the AlGaN/GaN ISFETs was evolved with gate recess process and ammonium hydroxide (NH 4 OH) treatment. By performing the gate recess process, the threshold voltage (V T ) of the ISFET increased from -3.33 to -0.31 V and the maximum conductance (G M ) of the ISFET increased from 0.8 to 2 mS, with the current sensitivity of the pH sensor improving from 52.25 to 78.86 μA/pH. Further, after performing the ammonium hydroxide treatment, the V T of the ISFET increased from -0.33 to -0.14 V, with the current sensitivity of the pH sensor improving from 78.86 to 84.39 μA/pH. To characterize the surface conditions the X-ray photoelectron spectroscopy (XPS) was deployed. The results indicated that many nitrogen vacancies (V N ) were introduced during the recess process, leading to a negative V T shift and a smaller potential sensitivity (S V ), which can be improved by ammonium hydroxide treatment.
This letter proposes an extended resistive-reactive continuous mode theory based on dual magnitude factor regulation. To address voltage swing compression in conventional methodologies, two independent magnitude regulation factors $\lambda $ and $\mu $ are introduced into the drain voltage waveform. This method establishes a dynamic compensation mechanism, achieving compensation of output power and drain efficiency (DE), while expanding the impedance design space (IDS) to enhance circuit design flexibility. To verify the proposed theory, a multioctave power amplifier (PA) is fabricated and measured. The measurement results show that a DE of 60.1%–75.9%, an output power of 39.9–42.3 dBm, and a gain of 9.4–11.5 dB are achieved within 0.8–3.8 GHz.