Phase change materials (PCMs) combined with silicon photonics are emerging as a promising platform to realize miniature photonic devices. We study the basic optical properties of a sub-wavelength-dimension silicon ridge waveguide with a 20-nm-thick Ge2Sb2Te5 (GST) top-clad layer. Numerical simulations show that the effective index of the Si-GST hybrid waveguide varies significantly when the GST changes from the amorphous to the crystalline states. This change can be utilized to make micron-size photonic devices. To experimentally verify the effectiveness of the Si-GST hybrid waveguide on light wave manipulation, we fabricated a series of unbalanced Mach-Zehnder interferometers with one arm connected with a section of Si-GST hybrid waveguide in different lengths. The transmission spectra are measured and the complex effective indices are extracted for GST at crystalline, amorphous and intermediate phases. The experimental results overall agree well with the simulation ones. The nonvolatile property of GST makes it attractive to reduce the static power consumption. This research represents a significant step towards the realization of ultra-compact Si-GST hybrid devices that will play a key role in high-density photonic integrated circuits, opening the door to many potential applications, including optical switch, memory and logic operation. Corresponding authors: Linjie Zhou (e-mail: ljzhou@sjtu.edu.cn)
In this paper, we investigate the performance of a self-sustained ON–OFF switch incorporating a new phase change material ${\text{Ge}_2}{\text{Sb}_2}{\text{Se}_4}{\text{Te}_1}$ (GSST) with a silicon rib waveguide at the telecommunication wavelength 1.55 µm. A full-vectorial $\textbf{H}$-field finite-element method is used to find the effective index and modal loss of the quasi-TE modes in the GSST-Si waveguide. Both the electro-refraction and electro-absorption type design are studied, and the effects of GSST thickness and Si slab thickness on the device performance are presented. These results suggest that a GSST-Si rib waveguide with a 500 nm wide Si core, 60–90 nm Si slab thickness, and 40–60 nm GSST layer could be a realistic switch design that can yield a very compact, 5 µm long device with only 0.135 dB total insertion loss and more than 20 dB extinction ratio.
This paper reports on the design optimization of compact optical ON-OFF switches based on a GST-clad silicon rib waveguide and compares it to a GST-clad silicon nanowire at the telecommunication wavelength 1.55 µm. Effective index and modal loss of the quasi-TE modes are calculated by a full-vectorial H-field finite element method. It shows that the electro-refraction effect-based switch may not be viable because of the higher modal loss in the GST crystalline state. On the other hand, the larger modal loss difference between GST amorphous and crystalline states would be more suitable for an electro-absorption type switch design. The effect of silicon slab thickness, silicon core width, and GST layer thickness for both the waveguides are presented. As the presence of the GST layer modifies the mode field profiles, so the incurring coupling loss at the butt-coupled junctions between the input/output silicon waveguide and Si-GST waveguide are also calculated by using the least squares boundary residual method. These results show that the GST-clad silicon rib waveguide with a 500-nm-wide silicon core, 60-90 nm thick silicon slab, and 15-25 nm thick GST layer is the optimal self-sustained switch design. In this case, a very compact, 2-5 µm long device is expected to show an extinction ratio of more than 20 dB with the total insertion loss of only 0.36 dB.