Hydroxyapatite (HA) powder suspension in deionized water was used as a dielectric liquid during electrical discharge machining (EDM) of Ti6Al4V work material. The machined surfaces were evaluated by scanning electron microscopy (SEM), energy dispersive spectroscopy, and optical microscopy. The powder particles in the dielectric liquid extensively migrated and formed an HA-rich layer on the work material surface under specific machining conditions. The result was attributed to the generation of secondary discharges due to altered discharge conditions. The particles divided the primary discharge channel into several secondary ones. When the main discharge channel subdivided into several sub-discharges with comparable energy densities, the particles in the discharge region got stuck among them. Then, they moved toward the melted cavities and penetrated the surface at the end of the discharge duration. The results suggest the process as a practical alternative for producing biocompatible interfaces or coatings for medical applications.
1 June 2006 in International Journal of Machine Tools and Manufacture
Procedures and results of experimental work to measure residual stresses and hardness depth in electric discharge machined surfaces are presented. Layer removal method is used to express the residual stress profile as a function of depth caused by a die sinking type EDM. Thin stressed layers are removed from machined samples by electrochemical machining. Corresponding deformations due to stress relaxation are recorded for each removal to determine the stress profile from elasticity theory. The relational dependence of the machining parameters with residual stresses is obtained and a semi-empirical model is proposed for plastic mold steel for de-ionized water as dielectric liquid. These stresses are found to be increasing rapidly with respect to depth, attaining to its maximum value, around the yield strength, and then fall rapidly to compressive residual stresses in the core of the material since the stresses within plastically deformed layers are equilibrated with elastic stresses.