1 October 2022 in Journal of Semiconductors
Planar semiconductor InGaAs/InP single photon avalanche diodes with high responsivity and low dark count rate are preferred single photon detectors in near-infrared communication. However, even with well-designed structures and well-controlled operational conditions, the performance of InGaAs/InP SPADs is limited by the inherent characteristics of avalanche process and the growth quality of InGaAs/InP materials. It is difficult to ensure high detection efficiency while the dark count rate is controlled within a certain range at present. In this paper, we fabricated a device with a thick InGaAs absorption region and an anti-reflection layer. The quantum efficiency of this device reaches 83.2%. We characterized the single-photon performance of the device by a quenching circuit consisting of parallel-balanced InGaAs/InP single photon detectors and single-period sinusoidal pulse gating. The spike pulse caused by the capacitance effect of the device is eliminated by using the characteristics of parallel balanced common mode signal elimination, and the detection of small avalanche pulse amplitude signal is realized. The maximum detection efficiency is 55.4% with a dark count rate of 43.8 kHz and a noise equivalent power of 6.96 × 10−17 W/Hz1/2 at 247 K. Compared with other reported detectors, this SPAD exhibits higher SPDE and lower noise-equivalent power at a higher cooling temperature.
27 January 2022 in Journal of Lightwave Technology
In this paper, we establish a modified equivalent circuit model suitable for all bias conditions for high-speed InGaAs/InAlAs avalanche photodiodes (APDs). The model includes three mechanisms: the carrier transit time, the avalanche buildup time, and the RC time constant. The physical meaning of each component in it is elaborated in detail. Component parameters in it of the demonstrated APD are extracted by fitting the RF reflection parameters S22 and transmission parameters S21 measured at different bias voltages. To verify the accuracy and regularity of these parameters, some relevant finite element simulations and theoretical analyses are carried out. Values and regularities of these parameters are consistent with the results of finite element simulations and theoretical analyses. With the help of this model and these accurate parameters, impedance distribution and bandwidth limiting factors of the demonstrated APD are analyzed thoroughly. According to the above analysis results, the performance optimization scheme for the demonstrated APD is obtained.
9 July 2025 in Semiconductor Science and Technology
To enhance the bandwidth characteristics, the size of the active region of avalanche photodiodes (APDs) has been generally reduced to less than 10 μm, and the optical coupling efficiency and tolerance have been drastically reduced, which seriously affects the practicality of the devices. To solve the above problems, this paper presents a flip-chip bonded high-speed InGaAs/InAlAs APD integrated with a micro-lens. The fabricated APD with the integrated micro-lens exhibits a maximum responsivity of 0.7 A W−1 at unit gain and a coupling efficiency of 96%, which are much higher than the 0.5 A W−1 and 68% of the APD without the micro-lens. The maximum bandwidth is 27 GHz, an ultra-low dark current is 5.7 nA under 0.9 times breakdown voltage, and a gain-bandwidth product is 210 GHz. With the micro-lens fabricated on the device’s backside, a Gaussian beam with a diameter of 10 μm can be effectively focused on an area of 7 μm width. The optical coupling tolerance (the radial distance from the active region center to the point where the responsivity drops to 90% of its maximum value) of the device is extended from 1.8 µm to 7 µm, larger than the active region radius of 3 μm. These features will significantly enhance the practicality of the high-speed APDs.
22 September 2022 in arXiv
Based on luminosity contributions, we develop a spectroscopic modelling method to derive atmospheric parameters of component stars in binary systems. The method is designed for those spectra of binaries which show double-lined features due to the radial velocities differences between the component stars. We first derive the orbital parameters and the stellar radii by solving the light and radial velocity curves. Then the luminosity contributions in different phases can be calculated. The synthesised double-lined spectra model is constructed by superposing theoretical single-star spectra according to the luminosity contributions. Finally, we derive the atmospheric parameters of each component star by the model fitting method. For multi-epoch double-lined spectra observed by the Large sky Area Multi-Object Spectroscopic Telescope (LAMOST) Medium Resolution Survey ($R \sim 7500$), our method gives robust results for detached eclipsing binary systems observed in different orbital phases. Furthermore, this method can also be applied to other spectroscopic data with different resolutions as long as the systems are detached eclipsing binaries with nearly spherical stars.