1 June 2018 in Bioresource Technology
1 April 2011 in Fuel Processing Technology
9 November 2010 in Journal of Chemical Technology & Biotechnology
1 February 2016 in Bioresource Technology
9 March 2018 in Applied Petrochemical Research
Jet fuel is a mixture of different hydrocarbon groups, and the mass contribution of each of these groups toward the overall chemical composition of the fuel dictates the bulk physical properties of the fuel after completion of the refining and blending processes. The fluidity properties of jet fuel mixtures at low temperatures are critical in understanding and mitigating the safety risks and performance attributes of aircraft engines, which may lead to the introduction of more stringent specification limits in the near future. Therefore, in this study the low-temperature viscosity and freeze point properties of jet fuels were investigated by variation of the linear to branched chain paraffin mass ratio, in conjunction with variation of the carbon number distribution according to a mixture by process variables experimental design. Furthermore, response surface models were developed and discussed for the two main fluidity properties of interest and inferences were made from the models for the potential generation of optimal jet fuel mixtures.
1 November 2017 in Bioresource Technology
The chemical and structural changes of three lignocellulosic biomass samples during pyrolysis were investigated using both conventional and advanced characterization techniques. The use of ATR-FTIR as a characterization tool is extended by the proposal of a method to determine aromaticity, the calculation of both CH2/CH3 ratio and the degree of aromatic ring condensation ((R/C)u). With increasing temperature, the H/C and O/C ratios, XA and CH2/CH3 ratio decreased, while (R/C)u and aromaticity increased. The micropore network developed with increasing temperature, until the coalescence of pores at 1100°C, which can be linked to increasing carbon densification, extent of aromatization and/or graphitization of the biomass chars. WAXRD-CFA measurements indicated the gradual formation of nearly parallel basic structural units with increasing carbonization temperature. The char development can be considered to occur in two steps: elimination of aliphatic compounds at low temperatures, and hydrogen abstraction and aromatic ring condensation at high temperatures.