As a revolutionary paradigm for controlling wireless channels, reconfigurable intelligent surfaces (RISs) have emerged as a candidate technology for future 6G networks. However, due to the “multiplicative fading” effect, the existing passive RISs only achieve limited capacity gains in many scenarios with strong direct links. In this paper, the concept of active RISs is proposed to overcome this fundamental limitation. Unlike passive RISs that reflect signals without amplification, active RISs can amplify the reflected signals via amplifiers integrated into their elements. To characterize the signal amplification and incorporate the noise introduced by the active components, we develop and verify the signal model of active RISs through the experimental measurements based on a fabricated active RIS element. Based on the verified signal model, we further analyze the asymptotic performance of active RISs to reveal the substantial capacity gain they provide for wireless communications. Finally, we formulate the sum-rate maximization problem for an active RIS aided multi-user multiple-input single-output (MU-MISO) system and a joint transmit beamforming and reflect precoding scheme is proposed to solve this problem. Simulation results show that, in a typical wireless system, passive RISs can realize only a limited sum-rate gain of 22%, while active RISs can achieve a significant sum-rate gain of 130%, thus overcoming the “multiplicative fading” effect.

Rate-splitting multiple access (RSMA) has emerged as a novel, general, and powerful framework for the design and optimization of non-orthogonal transmission, multiple access (MA), and interference management strategies for future wireless networks. By exploiting splitting of user messages as well as non-orthogonal transmission of common messages decoded by multiple users and private messages decoded by their corresponding users, RSMA can softly bridge and therefore reconcile the two extreme interference management strategies of fully decoding interference and treating interference as noise. RSMA has been shown to generalize and subsume as special cases four existing MA schemes, namely, orthogonal multiple access (OMA), physical-layer multicasting, space division multiple access (SDMA) based on linear precoding (currently used in the fifth generation wireless network–5G), and non-orthogonal multiple access (NOMA) based on linearly precoded superposition coding with successive interference cancellation (SIC). Through information and communication theoretic analysis, RSMA has been shown to be optimal (from a Degrees-of-Freedom region perspective) in several transmission scenarios. Compared to the conventional MA strategies used in 5G, RSMA enables spectral efficiency (SE), energy efficiency (EE), coverage, user fairness, reliability, and quality of service (QoS) enhancements for a wide range of network loads (including both underloaded and overloaded regimes) and user channel conditions. Furthermore, it enjoys a higher robustness against imperfect channel state information at the transmitter (CSIT) and entails lower feedback overhead and complexity. Despite its great potential to fundamentally change the physical (PHY) layer and media access control (MAC) layer of wireless communication networks, RSMA is still confronted with many challenges on the road towards standardization. In this paper, we present the first comprehensive tutorial on RSMA by providing a survey of the pertinent state-of-the-art research, detailing its architecture, taxonomy, and various appealing applications, as well as comparing with existing MA schemes in terms of their overall frameworks, performance, and complexities. An in-depth discussion of future RSMA research challenges is also provided to inspire future research on RSMA-aided wireless communication for beyond 5G systems.

Extremely large-scale antenna arrays, tremendously high frequencies, and new types of antennas are three clear trends in multi-antenna technology for supporting the sixth-generation (6G) networks. To properly account for the new characteristics introduced by these three trends in communication system design, the near-field spherical-wave propagation model needs to be used, which differs from the classical far-field planar-wave one. As such, near-field communication (NFC) will become essential in 6G networks. In this tutorial, we cover three key aspects of NFC. 1) Channel Modelling: We commence by reviewing near-field spherical-wave-based channel models for spatially-discrete (SPD) antennas. Then, uniform spherical wave (USW) and non-uniform spherical wave (NUSW) models are discussed. Subsequently, we introduce a general near-field channel model for SPD antennas and a Green’s function-based channel model for continuous-aperture (CAP) antennas. 2) Beamfocusing and Antenna Architectures: We highlight the properties of near-field beamfocusing and discuss NFC antenna architectures for both SPD and CAP antennas. Moreover, the basic principles of near-field beam training are introduced. 3) Performance Analysis: Finally, we provide a comprehensive performance analysis framework for NFC. For near-field line-of-sight channels, the received signal-to-noise ratio and power-scaling law are derived. For statistical near-field multipath channels, a general analytical framework is proposed, based on which analytical expressions for the outage probability, ergodic channel capacity, and ergodic mutual information are obtained. Finally, for each aspect, topics for future research are discussed.

Massive access, also known as massive connectivity or massive machine-type communication (mMTC), is one of the main use cases of the fifth-generation (5G) and beyond 5G (B5G) wireless networks. A typical application of massive access is the cellular Internet of Things (IoT). Different from conventional human-type communication, massive access aims at realizing efficient and reliable communications for a massive number of IoT devices. Hence, the main characteristics of massive access include low power, massive connectivity, and broad coverage, which require new concepts, theories, and paradigms for the design of next-generation cellular networks. This paper presents a comprehensive survey of massive access design for B5G wireless networks. Specifically, we provide a detailed review of massive access from the perspectives of theory, protocols, techniques, coverage, energy, and security. Furthermore, several future research directions and challenges are identified.

Flexible-antenna systems have recently received significant research interest due to their capability to reconfigure wireless channels intelligently. This paper focuses on a new type of flexible-antenna technology, termed pinching antennas, which can be realized by applying small dielectric particles on a waveguide. Analytical results are first developed for the simple case with a single pinching antenna and a single waveguide, where the unique feature of the pinching-antenna system to create strong line-of-sight links and mitigate large-scale path loss is demonstrated. An advantageous feature of pinching-antenna systems is that multiple pinching antennas can be activated on a single waveguide at no extra cost; however, they must be fed with the same signal. This feature motivates the application of non-orthogonal multiple access (NOMA), and analytical results are provided to demonstrate the superior performance of NOMA-assisted pinching-antenna systems. Finally, the case with multiple pinching antennas and multiple waveguides is studied, which resembles a classical multiple-input single-output (MISO) interference channel. By exploiting the capability of pinching antennas to reconfigure the wireless channel, it is revealed that a performance upper bound on the interference channel becomes achievable, where the achievability conditions are also identified. Computer simulation results are presented to verify the developed analytical results and demonstrate the superior performance of pinching-antenna systems.

Reconfigurable intelligent surfaces (RISs) are rapidly gaining prominence in the realm of 5G-advanced and predominantly 6G mobile networks, offering a revolutionary approach to optimizing wireless communications. This article delves into the intricate world of the RIS technology, exploring its diverse hardware architectures and the resulting versatile operating modes. These include RISs with signal reception and processing units, sensors, amplification units, transmissive capability, multiple stacked components, and dynamic metasurface antennas (DMAs). Furthermore, we shed light on emerging RIS applications, such as index and reflection modulation, noncoherent modulation, next-generation multiple access (NGMA), integrated sensing and communications (ISAC), energy harvesting (EH), as well as aerial and vehicular networks. These exciting applications are set to transform the way we will wirelessly connect in the upcoming era of 6G. Finally, we review recent experimental RIS setups and present various open problems of the overviewed RIS hardware architectures and their applications. From enhancing network coverage to enabling new communication paradigms, RIS-empowered connectivity is poised to play a pivotal role in shaping the future of wireless networking. This article unveils the underlying principles and potential impacts of RISs, focusing on cutting-edge developments of this physical-layer smart connectivity technology.