10 July 2023 in IEEE Transactions on Power Electronics
In this article, an isolated single-stage direct power conversion (DPC) type ac/ac converter is outlined. The ac/ac converter is based on differential-mode (DM) architecture where two dc/dc converter modules are connected differentially. The pulsewidth modulation active-clamp-Ćuk converter is used for the DM modules as the converter allows zero-voltage-switching turn- on capability on all switches over a wide operating range, enabling the construction of a high-efficiency ac/ac converter. This article details the modulation scheme and the operational analysis of the new DM ac/ac converter (DMAC). In DPC-type ac/ac converters, the converter is required to propagate the input port electric signal to the output port with minimal internal energy storage. The capacitative component internal to the converter undergoes the ac voltage transition, which appears as a capacitive load resulting in reactive power injection in the input port. Hence, a thorough design process of the ac/ac converter is provided to minimize the internal capacitance of the converter. A 1-kW hardware prototype is also built using the underscored design process to validate and demonstrate the operation of the ac/ac converter.
11 July 2022 in IEEE Transactions on Power Electronics
A novel modulation scheme for a bidirectional isolated pulsewidth modulation active-clamp (PAC)-Ćuk converter is presented in this article. In the PAC-Ćuk converter, the clamping circuit consisting of a capacitor, a series inductor, and an active device enables zero-voltage-switching (ZVS) turn- on capability of all the active devices. This additional circuit equips the converter with three independent control parameters. This article discusses power transfer, ZVS region, and circulating current dependency on the control parameters across the converter gain. Minimal circulating current is generally desired to decrease the conduction losses. With the help of the proposed modulation technique, the optimization of the control parameters to achieve lower circulating current while ensuring ZVS operation is also discussed. A 2-kW experimental converter is also designed and fabricated to validate the analysis.
19 April 2024 in IEEE Transactions on Power Electronics
This paper delves into the intricacies of electromagnetic side-channel noise intrusion (EM-SNI) and its impact on the voltage sensors of a solid-state transformer (SST). As described in this work, the EM-SNI attack can be easily deployed using a small antenna, and its effects spread without any electrical contact with the power-electronics hardware circuitry or measurement signal feedback. The cyber-physical attack is performed by injecting noise at very high frequencies (MHz range), and due to the aliasing effects of the analog-to-digital converter sampling, corrupt the feedback signal as sub- and super-60 Hz harmonic frequencies. Hence, this paper details how the EM-SNI mechanism works and analytically discusses the aliasing effects on noise frequency injections that could potentially harm the SST system. Subsequently, a method to detect and mitigate the impact of electromagnetic side-channel noise injection (EM-SNI) on the SST system is proposed to counteract its effects. The method involves a cross-correlation-based intrusion detection and voltage feedback observation on the instantaneous power-transfer relationship for mitigation. Experimental results confirm the effectiveness of the proposed methodology and are presented throughout the paper.
27 September 2023 in IEEE Transactions on Power Electronics
In this article, a novel continuous modulation scheme with variable-dc-offset (CMS-VDO) is proposed for a single-phase differential-mode inverter (DMI). The output voltage of the DMI is the difference in output voltages of two differentially connected dc–dc converters. CMS-VDO is so designed that the output voltage of the individual dc/dc converter is reduced without affecting the output voltage of the DMI. This reduced voltage yields reductions in circulating current, peak switch voltage, total harmonic distortion, and improved efficiency compared to conventional modulation scheme with fixed dc offset (CMS-FDO). The experimental results compare and validate the improved inverter performance using CMS-VDO over CMS-FDO.
2 August 2024 in IEEE Transactions on Power Electronics
Solid-state transformers (SSTs) rely on adequately functioning the closed-loop control and measurement feedback variables. Due to physical coupling, a network of SSTs is vulnerable to the diffusion of cyberattacks and their impact on the system's stability. AC–AC-type SSTs, in particular, rely heavily on control synchronization, and any fluctuations can quickly lead to system instability. In this letter, we explore the impact of radiated side-channel noise intrusion (SNI) diffusion on cascaded SSTs when such an attack is tuned to affect the fundamental coupling frequency. Experimental results, supported by analytical discussion, describe the effects and impact of radiated SNI on the stability of the phase-locked loop control and the overall system. Furthermore, we propose an intrusion detection strategy that responds rapidly to attacks in such circumstances.
14 October 2024 in IEEE Transactions on Power Electronics
Solid-state transformers (SSTs) are an emerging class of converters that have shown potential to replace traditional low-frequency transformers (LFTs). With cascading capabilities similar to modular multilevel converters, SSTs can efficiently handle higher voltage and power levels. A cascaded SST setup usually uses a decentralized hierarchical control architecture, with primary controllers overseeing operations at the module level and secondary controllers keeping an eye on operations at the aggregated phase level. Despite their potential to replace LFTs, reliability concerns hinder their widespread adoption, given their vulnerability to cyberattacks. Nonintrusive attacks, such as side-channel noise intrusion (SNI), threaten the SSTs' stability by corrupting the measurement feedback signals fed to the controllers. This letter proposes a novel technique for rapid intrusion detection and mitigation of radiative SNI threats to provide resilience to the secondary layer of the cascaded SSTs. The technique entails spectral decomposition of the noise-tampered signal, followed by noise-free signal reconstruction of the targeted frequency component. Experimental results validated the solution deployed in a cascaded SST experimental prototype's secondary control layer to deal with radiative noise on global input voltage sensor feedback.