This article presents a 5.2-Mpixel, 12-in wafer-scale CMOS X-ray detector that consists of lithographically stitched 169 sub-chips. The detector employs a 3T pixel with a voltage-controlled storage capacitor to achieve both a low dark random noise (RN) and a large well capacity, and the pixel outputs are read out by column-parallel continuous-time (CT) incremental delta-sigma (ΔΣ) analog-to-digital converters (ADCs). The use of a CT incremental ΔΣ ADC enables high resolution and low energy consumption while securing uniformity and robustness over the 12-in wafer. This work is fabricated in a 1P4M 65-nm CMOS technology. The 16-bit ADC implemented within a 45-μm pitch achieves a differential nonlinearity (DNL) of +0.79/-0.65 LSB, an integral nonlinearity (INL) of +6.85/-6.15 LSB, and a peak signal-to-noise ratio (SNR) of 88.5 dB with a conversion time of 12.6 μs. This detector achieves a CFPN of 181 μV rms , a dark RN of 267 μV rms , and a DR of 88.4 dB while consuming 3.9 W at 30 frames/s. Compared with the state of the arts, this work achieves 3× larger spatial resolution, 1.8× higher pixel rate, 1.9× higher energy-efficiency, and 17 dB higher DR, simultaneously.
21 August 2023 in IEEE Journal of Solid-State Circuits
This article presents a $400\ttimes 200$ single-photon avalanche diode (SPAD) X-ray detector that supports seamless global shutter operation. The pixel consists of an SPAD with two time-encoded extrapolation counters. For use under low X-ray dose conditions, the pixels and readout circuitry operate in a fully digital manner, avoiding the noise penalty of the readout. Under high X-ray dose conditions, the proposed counter operates in the extrapolation mode and thus achieves a high dynamic range (HDR), while reducing the counter’s power consumption. This is achieved by capturing the time of the counter overflow ( $T_{\rm OF}$ ) and expanding the counter depth by the ratio between the integration time ( $T_{\rm INT}$ ) and $T_{\rm OF}$ . To reconstruct $T_{\rm OF}$ , a $\phi_{\rm GCLK}$ signal is distributed during $T_{\rm INT}$ and accumulated from $T_{\rm OF}$ to the end of $T_{\rm INT}$ by reusing the counter. This only requires distribution of the $\phi_{\rm GCLK}$ across the pixel array. Furthermore, seamless global shutter operation is realized through the use of two counters, which achieves a 100% temporal aperture for the X-ray photon. The proposed X-ray detector is implemented in a 1P5M 65-nm CMOS process. To be used for both medical diagnosis and industrial inspection, the pixel pitch is selected as 49.5 $\mu\text{m}$ . The $400\ttimes 200$ detector achieves a dynamic range (DR) of 113.3 dB, while consuming only 127.2 mW. Compared with previous X-ray detectors, the proposed detector exhibits a 24.9-dB improvement in DR.