23 February 2012 in Earthquake Engineering & Structural Dynamics
5 February 2020 in Structural Control and Health Monitoring
1 November 2012 in Journal of Asian Architecture and Building Engineering
1 February 2017 in Mechanical Systems and Signal Processing
The demand for developing renewable energy technologies has been growing in today\u27s society. As one of promising renewable energy sources, large-scale energy harvesting from structural vibrations employing electromagnetic transducers has recently been proposed and considerable effort has been devoted to increase the power generation capability. In this paper, we introduce the mechanism of a tuned inertial mass electromagnetic transducer (TIMET), which can absorb vibratory energy more efficiently by tuning the parameters to adjust the system. Then we propose a new vibratory energy harvester with the TIMET and determine the parameter values for the device with a simple static admittance (SA) control law to maximize the energy harvested from a stationary stochastic disturbance. To investigate the energy harvesting potential of the TIMET further, the performance-guaranteed (PG) control and the LQG control proposed in the literature are applied as well. Then the numerical simulation studies are carried out and the effectiveness of the proposed energy harvester is examined by comparing the traditional electromagnetic transducers
21 December 2016 in Structural Control and Health Monitoring
Interstory isolation systems have recently gained popularity as an alternative for seismic protection, especially in densely populated areas. In inter-story isolation, the isolation system is incorporated between stories instead of the base of the structure. Installing inter-story isolation is simple, inexpensive, and disruption free in retrofit applications. Benefits include nominally independent structural systems where the accelerations of the added floors are reduced when compared to a conventional structural system. Furthermore, the base shear demand on the total structure is not significantly increased. Practical applications of inter-story isolation have appeared in the United States, Japan, and China, and likewise new design validation techniques are needed to parallel growing interest. Real-time hybrid simulation (RTHS) offers an alternative to investigate the performance of buildings with inter-story isolation. Shake tables, standard equipment in many laboratories, are capable of providing the interface boundary conditions necessary for this application of RTHS. The substructure below the isolation layer can be simulated numerically while the superstructure above the isolation layer can be tested experimentally. This configuration provides a high-fidelity representation of the nonlinearities in the isolation layer, including any supplemental damping devices. This research investigates the seismic performance of a 14-story building with inter-story isolation. A model-based acceleration-tracking approach is adopted to control the shake table, exhibiting good offline and online acceleration tracking performance. The proposed methods demonstrate that RTHS is an accurate and reliable means to investigate buildings with inter-story isolation, including new configurations and supplemental control approaches.
1 February 2019 in Engineering Structures