1 July 2013 in Journal of Structural Engineering
Substructure hybrid simulation is a powerful, cost-effective alternative for testing structural systems, closely coupling numerical simulation and experimental testing to obtain the complete response of a structure. In this approach, well-understood components of the structure are modeled numerically, while the components of interest are tested physically. Generally, an arbitrary amount of time may be used to calculate and apply displacements at each step of the hybrid simulation. However, when the rate-dependent behavior of the physical specimen is important, real-time hybrid simulation (RTHS) must be used. Computation, communication, and servohydraulic actuator limitations cause delays and lags that lead to inaccuracies and potential instabilities in RTHS. This paper proposes a new model-based servohydraulic tracking control method including feedforward-feedback links to achieve accurate tracking of a desired displacement in real time. The efficacy of the proposed approach is demonstrated throug...
1 December 2009 in Earthquake Engineering and Engineering Vibration
1 June 2015 in Journal of Structural Engineering
1 December 2013 in Engineering Structures
17 September 2013 in Earthquake Engineering & Structural Dynamics
21 December 2016 in Structural Control and Health Monitoring
Interstory isolation systems have recently gained popularity as an alternative for seismic protection, especially in densely populated areas. In inter-story isolation, the isolation system is incorporated between stories instead of the base of the structure. Installing inter-story isolation is simple, inexpensive, and disruption free in retrofit applications. Benefits include nominally independent structural systems where the accelerations of the added floors are reduced when compared to a conventional structural system. Furthermore, the base shear demand on the total structure is not significantly increased. Practical applications of inter-story isolation have appeared in the United States, Japan, and China, and likewise new design validation techniques are needed to parallel growing interest. Real-time hybrid simulation (RTHS) offers an alternative to investigate the performance of buildings with inter-story isolation. Shake tables, standard equipment in many laboratories, are capable of providing the interface boundary conditions necessary for this application of RTHS. The substructure below the isolation layer can be simulated numerically while the superstructure above the isolation layer can be tested experimentally. This configuration provides a high-fidelity representation of the nonlinearities in the isolation layer, including any supplemental damping devices. This research investigates the seismic performance of a 14-story building with inter-story isolation. A model-based acceleration-tracking approach is adopted to control the shake table, exhibiting good offline and online acceleration tracking performance. The proposed methods demonstrate that RTHS is an accurate and reliable means to investigate buildings with inter-story isolation, including new configurations and supplemental control approaches.