Teku Kalyani

Teku Kalyani

Auto-generated profile, based on publicly available information

Teku Kalyani

Raghu Engineering College, India

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 December 2024 in Heliyon
Verified
Journal Article
Open access
SAsulieman Al-Hawary
sulieman Al-Hawary
AVAsokan Vasudevan
Asokan Vasudevan
KPKDV Prasad
KDV Prasad
IAInas Ridha Ali
Inas Ridha Ali
AKAbhinav Kumar
Abhinav Kumar
MSMohammad Sina
Mohammad Sina
Biodiesel is a non-toxic, renewable, and environmentally friendly fuel used in compression ignition engines. This work aimed to develop Fe3O4/SiO2 as a cheap, magnetic, and easy separable catalyst for biodiesel production from waste oil by sono-catalytic transesterification. Fe₃O₄-SiO₂ was prepared using a modified Stober method and used as a heterogeneous catalyst in an ultrasound-assisted transesterification reaction to produce biodiesel. The tests were designed by the Response surface methodology by considering the molar ratio of methanol to oil (M/O), catalyst weight percentage, and sonication time as independent factors. The produced biodiesel in diesel generator engines and the emission of pollutants were evaluated. The optimal production conditions were determined using the response surface methodology, which included a molar ratio of 8.30, a catalyst weight percentage of 5.30, and a sonication time of 30.02 min. The Pareto analysis indicated that the sonication time is the most important factor in the sono-catalytic transesterification of waste oil. The evaluation of the produced fuel showed that with an increase in the percentage of biodiesel in the engine's fuel input, CO emissions decreased by 0.027 % and smoke levels by 24 %, while NOx levels increased by 495 ppm. Additionally, the increase in biodiesel percentage led to a rise in brake-specific power by 44.6 kW and brake-specific fuel consumption by 89 g/kWh though brake torque decreased by 87 Nm. The study introduces significant advancements in biodiesel production technology through combining heterogeneous catalysis and ultrasound processing, optimizing production parameters for efficiency and sustainability while demonstrating improved environmental performance in diesel engines.

18 January 2023 in International Journal of Renewable Energy Development
Verified
Journal Article
Open access
PDF file
TKTeku Kalyani
Teku Kalyani
LPLankapalli Sathya Vara Prasad
Lankapalli Sathya Vara Prasad
Aditya KolakotiAditya Kolakoti
Aditya Kolakoti
The present study focuses on oil extraction and biodiesel production from naturally grown green Spirogyra algae. Solvent oil extraction and oil expeller techniques were used to extract the Spirogyra algae oil (SALO), and the oil yields were compared to identify the most productive method. Using chicken eggshell waste (CESW) heterogeneous catalyst (HC) was prepared for the production of Spirogyra algae oil biodiesel (SALOBD). Furthermore, Box–Behnken (BB) assisted response surface method (RSM), an optimisation technique, was used in this study to achieve maximum algae biodiesel yield. From the 29 experimental trails, 96.18 % SALOBD was achieved at molar ratio (10:1), heterogeneous catalyst (0.6 wt.%), temperature (48 oC), and time (180 minutes). The predicted values of R2 (97.51%) and Adj. R2 (95.02 %) is found to be encouraging and fits well with the experimental values. The output results show that HC was identified as the significant process constraint followed by the time. The fatty acid composition (FAC) analysis by Gas Chromatography (GCMS) reveals the presence of 29.3 % unsaturated composition and 68.39 wt. % of the saturated composition. Finally, the important fuel properties of SALOBD were identified in accordance with ASTM D6751. The results obtained using chicken eggshell waste (CESW) for the production of biodiesel were recommended as a diesel fuel replacement to resist energy and environmental calamities.

8 January 2025 in Nanotechnology
Verified
Journal Article
Closed access
AAArsalan Ahmad
Arsalan Ahmad
BABadria M Alshehri
Badria M Alshehri
PKPrakash Kanjariya
Prakash Kanjariya
NKNitin Kumar
Nitin Kumar
RSRohit Sharma
Rohit Sharma
NEN S Abd El-Gawaad
N S Abd El-Gawaad
In this study, the electrodeposition method is employed to treat carbon nanotubes (CNTs) with polythiophene (PTh), polypyrrole (PPy), poly(3,4-ethylenedioxythiophene) (PEDOT), and polyaniline (PANI) polymers, and used them as counter electrodes (CEs) in the structure of wire-shaped dye-sensitized solar cells (WDSSCs). Photoanodes are made of Ti wires that have been anodized and surface treated to produce TiO2. We used FESEM images, FTIR, EIS, CV, and Tafel analyses for characterization. Electrochemical methods demonstrate that PEDOT and PANI CEs have higher electrocatalytic activity than that of PTh and PPy polymers, resulting in more current for the WDSSCs. Furthermore, PANI and PEDOT CEs have higher electrocatalytic activity than platinum wire, which is promising. The efficiency of the wire-shaped solar cell based on PEDOT and PANI CEs are 8.51 and 8.58%, which are improved respectively by 7 and 8% compared to the Pt sample, indicating that it could be a promising replacement for this expensive element. Furthermore, the power conversion efficiency test for wire-shaped solar cells using polymer CEs demonstrates their proper performance at various bending angles as well as their high mechanical stability. The long-term stability of wire-shaped solar cells (2000 hours) demonstrates that PANI and PEDOT solar cells have maintained respectively 94 and 88% of their initial efficiency.

16 October 2024 in Journal of Molecular Structure
Verified
Journal Article
Closed access
MSMuath Suliman
Muath Suliman
FAFarag M.A. Altalbawy
Farag M.A. Altalbawy
DSDharmesh Sur
Dharmesh Sur
SGSubbulakshmi Ganesan
Subbulakshmi Ganesan
SSShakeerah Mohd Shukri
Shakeerah Mohd Shukri
MAMontether Almoswee
Montether Almoswee

7 June 2025 in Energy
Verified
Journal Article
Closed access
MSManzoore Elahi M. Soudagar
Manzoore Elahi M. Soudagar
HWHua-Rong Wei
Hua-Rong Wei
AAAsif Afzal
Asif Afzal
VSVikram Sundara
Vikram Sundara
YFYasser Fouad
Yasser Fouad
SISaiful Islam
Saiful Islam

30 October 2024 in Case Studies in Thermal Engineering
Verified
Journal Article
Open access
MSM. Sonachalam
M. Sonachalam
RJR. Jayaprakash
R. Jayaprakash
VMV. Manieniyan
V. Manieniyan
PRP.S. Raghavendra Rao
P.S. Raghavendra Rao
GVG. Vinodhini
G. Vinodhini
KSKeerthi Shetty
Keerthi Shetty